LP38501-ADJ_15 Datasheet, PDF (4/27 Pages) Texas Instruments – LP3850x-ADJ, LP3850xA-ADJ 3-A FlexCap Low Dropout Linear Regulator for 2.7-V to 5.5-V Inputs

LP38501-ADJ, LP38503-ADJ
SNVS522I – AUGUST 2007 – REVISED AUGUST 2015
www.ti.com
6 Specifications
6.1 Absolute Maximum Ratings
over operating free-air temperature range (unless otherwise noted)⁽¹⁾
IN pin voltage (survival)
EN pin voltage (survival)
OUT pin voltage (survival)
I_OUT (survival)
Power dissipation⁽²⁾
Storage temperature, T_stg
MIN
MAX
−0.3
6
−0.3
6
−0.3
6
Internally limited
Internally limited
−65
150
UNIT
V
V
V
°C
(1) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings
only, which do not imply functional operation of the device at these or any other conditions beyond those indicated under Recommended
Operating Conditions. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) Operating junction temperature must be evaluated, and derated as needed, based on ambient temperature (T_A), power dissipation (P_D),
maximum allowable operating junction temperature (T_J(MAX)), and package thermal resistance (R_θJA). See Application and
Implementation.
6.2 ESD Ratings
V_ESD Electrostatic discharge
Human body model (HBM), per ANSI/ESDA/JEDEC JS-001, all pins⁽¹⁾
VALUE
±2000
(1) JEDEC document JEP155 states that 500-V HBM allows safe manufacturing with a standard ESD control process.
UNIT
V
6.3 Recommended Operating Conditions
over operating free-air temperature range (unless otherwise noted)⁽¹⁾
Input supply voltage
Enable input voltage
Output current (DC)
V_OUT
Junction temperature⁽²⁾
MIN
NOM
MAX UNIT
2.7
5.5
V
0
5.5
V
0
3
A
0.6
5
V
−40
125
°C
(1) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings
only, which do not imply functional operation of the device at these or any other conditions beyond those indicated under Recommended
Operating Conditions. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) Operating junction temperature must be evaluated, and derated as needed, based on ambient temperature (T_A), power dissipation (P_D),
maximum allowable operating junction temperature (T_J(MAX)), and package thermal resistance (R_θJA). See Application and
Implementation.
6.4 Thermal Information
THERMAL METRIC⁽¹⁾
LP38501 and LP38503
KTT(DDPAK/TO-263)
NDQ (TO-263)
UNIT
5 PINS
5 PINS
R_θJA
R_θJC(top)
R_θJB
ψ_JT
ψ_JB
R_θJC(bot)
Junction-to-ambient thermal resistance
Junction-to-case (top) thermal resistance
Junction-to-board thermal resistance
Junction-to-top characterization parameter
Junction-to-board characterization parameter
Junction-to-case (bottom) thermal resistance
41.8
33.3
°C/W
45.0
22.1
°C/W
24.8
16.9
°C/W
13.1
5.8
°C/W
23.8
16.8
°C/W
2.4
2.3
°C/W
(1) For more information about traditional and new thermal metrics, see the Semiconductor and IC Package Thermal Metrics application
report, SPRA953.
4
Submit Documentation Feedback
Copyright © 2007–2015, Texas Instruments Incorporated
Product Folder Links: LP38501-ADJ LP38503-ADJ