LM358M Datasheet, PDF (4/33 Pages) Estek Electronics Co. Ltd – Dual Operational Amplifiers

LM158-N, LM258-N, LM2904-N, LM358-N
SNOSBT3H – JANUARY 2000 – REVISED MARCH 2013
www.ti.com
ELECTRICAL CHARACTERISTICS
V⁺ = +5.0V, unless otherwise stated
Parameter
Conditions
LM158A
LM358A
LM158/LM258 Units
Input Offset Voltage
Input Bias Current
Input Offset Current
Input Common-Mode
Voltage Range
Supply Current
(1)_{, TA = 25°C}
I_IN(+) or I_IN(−), T_A = 25°C,
V_CM = 0V, ⁽²⁾
I_IN(+) − I_IN(−), V_CM = 0V, T_A = 25°C
V⁺ = 30V,⁽³⁾
(LM2904, V⁺ = 26V), T_A = 25°C
Over Full Temperature Range
Min Typ Max Min Typ Max Min Typ Max
1
2
2
3
2
5
mV
20 50
45 100
45 150
nA
2 10
5 30
3 30
nA
0
V⁺−1.5 0
V⁺−1.5 0
V⁺−1.5 V
R_L = ∞ on All Op Amps
V⁺ = 30V (LM2904 V⁺ = 26V)
V⁺ = 5V
1
2
0.5 1.2
1
2
0.5 1.2
1
2
mA
0.5 1.2
mA
(1) V_O ≃ 1.4V, R_S = 0Ω with V⁺ from 5V to 30V; and over the full input common-mode range (0V to V⁺ −1.5V) at 25°C. For LM2904, V⁺ from
5V to 26V.
(2) The direction of the input current is out of the IC due to the PNP input stage. This current is essentially constant, independent of the
state of the output so no loading change exists on the input lines.
(3) The input common-mode voltage of either input signal voltage should not be allowed to go negative by more than 0.3V (at 25°C). The
upper end of the common-mode voltage range is V⁺ −1.5V (at 25°C), but either or both inputs can go to +32V without damage (+26V for
LM2904), independent of the magnitude of V⁺.
ELECTRICAL CHARACTERISTICS
V⁺ = +5.0V, unless otherwise stated
Parameter
Conditions
Input Offset Voltage
Input Bias Current
Input Offset Current
Input Common-Mode
Voltage Range
Supply Current
See⁽¹⁾ , T_A = 25°C
I_IN(+)
V_CM
=or0IV^IN,^(−S^),eTeA(2)=
25°C,
I_IN(+) − I_IN(−), V_CM = 0V, T_A = 25°C
V⁺ = 30V, See⁽³⁾
(LM2904, V⁺ = 26V), T_A = 25°C
Over Full Temperature Range
R_L = ∞ on All Op Amps
V⁺ = 30V (LM2904 V⁺ = 26V)
V⁺ = 5V
LM358
Min Typ Max
2
7
45 250
5
50
0
V⁺−1.
5
LM2904
Min Typ Max
2
7
45 250
5
50
0
V⁺−1.
5
Units
mV
nA
nA
V
1
2
0.5 1.2
1
2
mA
0.5 1.2
mA
(1) V_O ≃ 1.4V, R_S = 0Ω with V⁺ from 5V to 30V; and over the full input common-mode range (0V to V⁺ −1.5V) at 25°C. For LM2904, V⁺ from
5V to 26V.
(2) The direction of the input current is out of the IC due to the PNP input stage. This current is essentially constant, independent of the
state of the output so no loading change exists on the input lines.
(3) The input common-mode voltage of either input signal voltage should not be allowed to go negative by more than 0.3V (at 25°C). The
upper end of the common-mode voltage range is V⁺ −1.5V (at 25°C), but either or both inputs can go to +32V without damage (+26V for
LM2904), independent of the magnitude of V⁺.
4
Submit Documentation Feedback
Copyright © 2000–2013, Texas Instruments Incorporated
Product Folder Links: LM158-N LM258-N LM2904-N LM358-N