TMS320C6416EGLZ6E3 Datasheet, PDF (39/145 Pages) Texas Instruments – FIXED-POINT DIGITAL SIGNAL PROCESSORS

TMS320C6414, TMS320C6415, TMS320C6416
FIXED-POINT DIGITAL SIGNAL PROCESSORS
SPRS146N − FEBRUARY 2001 − REVISED MAY 2005
DEVICE CONFIGURATIONS (CONTINUED)
Table 28. Device Configuration Pins (BEA[20:13, 9:7], HD5, and BEA11) (Continued)
CONFIGURATION
PIN
NO.
C6414 Devices
FUNCTIONAL DESCRIPTION
C6415 Devices
C6416 Devices
BEA7
BEA8
BEA9
D15
Do not oppose internal pulldown (IPD) Pullup^†
A16
Do not oppose IPD
Do not oppose IPD
B16
Do not oppose IPD
Do not oppose IPD
Do not oppose IPD
Pullup^†
Pullup^†
HD5
†_{For proper device operation, this pin must be externally pulled up with a 1-kΩ resistor.}
HPI peripheral bus width (HPI_WIDTH)
0 − HPI operates as an HPI16.
Y1
(HPI bus is 16 bits wide. HD[15:0] pins are used and the remaining HD[31:16] pins are
reserved pins in the Hi-Z state.)
1 − HPI operates as an HPI32.
(HPI bus is 32 bits wide. All HD[31:0] pins are used for host-port operations.)
• POST OFFICE BOX 1443 HOUSTON, TEXAS 77251−1443
39