TS5A3159_15 Datasheet, PDF (3/29 Pages) Texas Instruments – TS5A3159 1-Ω SPDT Analog Switch

www.ti.com
5 Pin Configuration and Functions
TS5A3159
SCDS174C – AUGUST 2004 – REVISED MARCH 2015
NO 1
DBV and DCK Packages
6-Pin SOT-23 and SC-70
(Top View)
TS5A3159
6 _IN
GND 2
NC 3
5 _V+
4 COM
PIN
NO.
NAME
1
NO
2
GND
3
NC
4
COM
5
V+
6
IN
Pin Functions
I/O
DESCRIPTION
I/O Digital control pin to select between NC and NO
— Ground
I/O Normally closed switch port
I/O Common switch port
— Power supply
I Switch select. High = COM connected to NO; Low = COM connected to NC.
6 Specifications
6.1 Absolute Maximum Ratings
over operating free-air temperature range (unless otherwise noted)⁽¹⁾
V₊
V_NO
V_COM
I_I/OK
I_NO
I_COM
V_IN
I_IK
T_stg
Supply voltage⁽²⁾
Analog voltage^(2)(3)(4)
Analog port diode current
ON-state switch current
ON-state peak switch current⁽⁵⁾
Digital input voltage⁽²⁾⁽³⁾
Digital input clamp current
Continuous current through V₊ or GND
Storage temperature
V_NO, V_COM < 0 or V_NO, V_COM > V₊
V_NO, V_COM = 0 to V₊
V_IN < 0
MIN
MAX
UNIT
–0.5
6.5
V
–0.5
V₊ + 0.5
V
±50
mA
±200
mA
±400
mA
–0.5
6.5
V
–50
mA
±100
mA
–65
150
°C
(1) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating
Conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) All voltages are with respect to ground, unless otherwise specified.
(3) The input and output voltage ratings may be exceeded if the input and output clamp-current ratings are observed.
(4) This value is limited to 5.5 V maximum.
(5) Pulse at 1-ms duration < 10% duty cycle.
6.2 ESD Ratings
V_(ESD) Electrostatic discharge
Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001⁽¹⁾
Charged-device model (CDM), per JEDEC specification JESD22-
C101 ⁽²⁾
VALUE
±2000
±1000
UNIT
V
(1) JEDEC document JEP155 states that 500-V HBM allows safe manufacturing with a standard ESD control process.
(2) JEDEC document JEP157 states that 250-V CDM allows safe manufacturing with a standard ESD control process.
Copyright © 2004–2015, Texas Instruments Incorporated
Product Folder Links: TS5A3159
Submit Documentation Feedback
3