TL783 Datasheet, PDF (3/13 Pages) Texas Instruments – HIGH-VOLTAGE ADJUSTABLE REGULATOR

TL783
HIGH-VOLTAGE ADJUSTABLE REGULATOR
SLVS036E – SEPTEMBER 1981 – REVISED FEBRUARY 2000
electrical characteristics at V_l – V_O = 25 V, I_O = 0.5 A, T_J = 0°C to 125°C (unless otherwise noted)
PARAMETER
TEST CONDITIONS†
TL783C
UNIT
MIN TYP MAX
Input voltage
regulation‡
Ripple rejection
VI – VO = 20 V to 125 V,
∆VI(PP) = 10 V,
Output voltage
regulation
IO = 15 mA to 700 mA,
IO = 15 mA to 700 mA,
Output voltage change
with temperature
P ≤ rated dissipation
VO = 10 V,
TJ = 25°C
P ≤ rated dissipation
TJ = 25°C
TJ = 0°C to 125°C
f = 120 Hz
VO ≤ 5 V
VO ≥ 5 V
VO ≤ 5 V
VO ≥ 5 V
0.001 0.01
%/V
0.004 0.02
66
76
dB
7.5
25 mV
0.15% 0.5%
20
70 mV
0.3% 1.5%
0.4%
Output voltage
long-term drift
Output noise voltage
Minimum
output current to
maintain regulation
1000 hours at TJ = 125°C, VI – VO = 125 V
f = 10 Hz to 10 kHz,
TJ = 25°C
VI – VO = 125 V
0.2%
0.003%
15 mA
Peak output current
ADJ input current
VI – VO = 25 V,
VI – VO = 15 V,
VI – VO = 25 V,
VI – VO = 125 V,
t = 1 ms
t = 30 ms
t = 30 ms
t = 30 ms
1100
715
mA
700
900
100
250
83 110 µA
Change in
ADJ input current
VI – VO = 15 V to 125 V, IO = 15 mA to 700 mA, P ≤ rated dissipation
0.5
5 µA
Reference voltage
(OUT to ADJ)
VI – VO = 10 V to 125 V,
See Note 3
IO = 15 mA to 700 mA, P ≤ rated dissipation,
1.2
1.27
1.3
V
† _{Pulse-testing techniques maintain the junction temperature as close to the ambient temperature as possible. Thermal effects must be taken into}
account separately.
‡ _{Input voltage regulation is expressed here as the percentage change in output voltage per 1-V change at the input.}
NOTE 3: Due to the dropout voltage and output current-limiting characteristics of this device, output current is limited to less than 700 mA at
input-to-output voltage differentials of less than 25 V.
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265
3