TL750M Datasheet, PDF (3/20 Pages) Texas Instruments – LOW-DROPOUT VOLTAGE REGULATORS

www.ti.com
Absolute Maximum Ratings⁽¹⁾
over virtual junction temperature range (unless otherwise noted)
TL750M SERIES, TL751M SERIES
LOW-DROPOUT VOLTAGE REGULATORS
SLVS021K – JANUARY 1988 – REVISED OCTOBER 2006
Continuous input voltage
Transient input voltage (see Figure 3)
Continuous reverse input voltage
Transient reverse input voltage
θ_JA
Package thermal impedance⁽²⁾⁽³⁾
T_J
Virtual junction temperature range
Lead temperature
T_stg
Storage temperature range
t = 100 ms
KC package
KTE package
KTG package
KTP package
KTT package
1,6 mm (1/16 in) from case for 10 s
MIN MAX UNIT
26 V
60 V
–15 V
–50 V
22
23
23 °C/W
28
25.3
0
150 °C
260 °C
–65
150 °C
(1) Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating
conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) Maximum power dissipation is a function of T_J(max), θ_JA, and T_A. The maximum allowable power dissipation at any allowable ambient
temperature is P_D = (T_J(max) – T_A)/θ_JA. Operating at the absolute maximum T_J of 150°C can affect reliability. Due to variation in
individual device electrical characteristics and thermal resistance, the built-in thermal-overload protection may be activated at power
levels slightly above or below the rated dissipation.
(3) The package thermal impedance is calculated in accordance with JESD 51.
Recommended Operating Conditions
V_I
Input voltage
V_IH
High-level ENABLE input voltage
V_IL
Low-level ENABLE input voltage
I_O
Output current
T_J
Operating virtual junction temperature
TL75xM05
TL75xM08
TL75xM10
TL75xM12
TL751Mxx
TL751Mxx
TL75xMxxC
TL75xMxxC
MIN
MAX UNIT
6
26
9
26
V
11
26
13
26
2
15 V
0
0.8 V
750 mA
0
125 °C
TL751MxxC Switching Characteristics
V_I = 14 V, I_O = 300 mA, T_J = 25°C (unless otherwise noted)
PARAMETER
t_r
Response time, ENABLE to output
TL751MxxC
TYP
50
UNIT
µs
Submit Documentation Feedback
3