TL5209_15 Datasheet, PDF (3/23 Pages) Texas Instruments – TL5209 500-mA Low-Noise Low-Dropout Voltage Regulator With Shutdown

www.ti.com
6 Pin Configuration and Functions
TL5209
SLVS581B – SEPTEMBER 2006 – REVISED JUNE 2015
D Package
8-Pin SOIC
Top View
EN 1
IN 2
OUT 3
ADJ/BYP 4
8 GND
7 GND
6 GND
5 GND
NAME
PIN
NO.
ADJ/BYP
4
EN
1
GND
5-8
IN
2
OUT
3
Pin Functions
I/O
DESCRIPTION
Adjust/Bypass pin, forces a constant voltage of 1.242 V to allow for adjusting the output
I
voltage with external resistors. A bypass capacitance can be used on this pin to slow down
the ramp up of the output voltage.
I
Control input, active high
-
Ground
I
Input voltage
O
Output voltage
7 Specifications
7.1 Absolute Maximum Ratings⁽¹⁾
over operating free-air temperature range (unless otherwise noted)
MIN MAX UNIT
V_I
Continuous input voltage
V_O
Output voltage
T_stg
Storage temperature
–20
20 V
7.5 V
–65
150 °C
(1) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating
Conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
7.2 ESD Ratings
V_(ESD) Electrostatic discharge
Human body model (HBM), per ANSI/ESDA/JEDEC JS-001⁽¹⁾
Charged device model (CDM), per JEDEC specification JESD22-
C101 ⁽²⁾
VALUE
±2500
±1000
(1) JEDEC document JEP155 states that 500-V HBM allows safe manufacturing with a standard ESD control process.
(2) JEDEC document JEP157 states that 250-V CDM allows safe manufacturing with a standard ESD control process.
UNIT
V
7.3 Recommended Operating Conditions
V_I
Input voltage
V_O
Output voltage
V_EN
Enable input voltage
T_J
Operating junction temperature
MIN
MAX UNIT
2.5
16 V
6.5 V
0
V_I
V
–40
125 °C
Copyright © 2006–2015, Texas Instruments Incorporated
Product Folder Links: TL5209
Submit Documentation Feedback
3