SN74LVCZ32245A Datasheet, PDF (3/12 Pages) Texas Instruments – 32-BIT BUS TRANSCEIVER WITH 3-STATE OUTPUTS

www.ti.com
A3
1DIR
A5
1A1
SN74LVCZ32245A
32-BIT BUS TRANSCEIVER
WITH 3-STATE OUTPUTS
SCES423 – JANUARY 2003 – REVISED JUNE 2005
LOGIC DIAGRAM (POSITIVE LOGIC)
H3
2DIR
A4 _1OE
H4 _2OE
E5
2A1
A2
1B1
E2
2B1
J3
3DIR
3A1 ^J5
To Seven Other Channels
J4 _3OE
J2
3B1
T3
4DIR
4A1 ^N5
To Seven Other Channels
T4 _4OE
N2
4B1
To Seven Other Channels
To Seven Other Channels
Absolute Maximum Ratings⁽¹⁾
over operating free-air temperature range (unless otherwise noted)
V_CC
Supply voltage range
V_I
Input voltage range⁽²⁾
V_O
Voltage range applied to any output in the high-impedance or power-off state⁽²⁾
V_O
Voltage range applied to any output in the high or low state⁽²⁾⁽³⁾
I_IK
Input clamp current
V_I < 0
I_OK
Output clamp current
V_O < 0
I_O
Continuous output current
Continuous current through each V_CC or GND
θ_JA
Package thermal impedance⁽⁴⁾
T_stg
Storage temperature range
MIN
MAX UNIT
–0.5
6.5 V
–0.5
6.5 V
–0.5
6.5 V
–0.5 V_CC + 0.5
V
–50 mA
–50 mA
±50 mA
±100 mA
40 °C/W
–65
150 °C
(1) Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating
conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) The input negative-voltage and output voltage ratings may be exceeded if the input and output current ratings are observed.
(3) The value of V_CC is provided in the recommended operating conditions table.
(4) The package thermal impedance is calculated in accordance with JESD 51-7.
3