SN74ALVC164245_07 Datasheet, PDF (3/22 Pages) Texas Instruments – 16-BIT 2.5-V TO 3.3-V/3.3-V TO 5-V LEVEL-SHIFTING TRANSCEIVER WITH 3-STATE OUTPUTS

www.ti.com
1DIR ¹
1A1 ⁴⁷
SN74ALVC164245
16-BIT 2.5-V TO 3.3-V/3.3-V TO 5-V LEVEL-SHIFTING TRANSCEIVER
WITH 3-STATE OUTPUTS
SCAS416P – MARCH 1994 – REVISED NOVEMBER 2005
LOGIC DIAGRAM (POSITIVE LOGIC)
24
2DIR
48
1OE
25
2OE
36
2A1
2 _1B1
13 _2B1
To Seven Other Channels
To Seven Other Channels
Absolute Maximum Ratings⁽¹⁾
over operating free-air temperature range for V_CCB at 5 V and V_CCA at 3.3 V (unless otherwise noted)
MIN
MAX UNIT
V_CC
Supply voltage range
V_CCA
V_CCB
Except I/O ports⁽²⁾
V_I
Input voltage range
I/O port A⁽³⁾
I/O port B⁽²⁾
I_IK
Input clamp current
V_I < 0
I_OK
Output clamp current
V_O < 0
I_O
Continuous output current
Continuous current through each V_CC or GND
DGG package
–0.5
4.6
V
–0.5
6
–0.5
6
–0.5 V_CCA + 0.5
V
–0.5 V_CCB + 0.5
–50 mA
–50 mA
±50 mA
±100 mA
70
θ_JA
Package thermal impedance⁽⁴⁾
DL package
GQL/ZQL package
63
°C/W
42
T_stg
Storage temperature range
GRD/ZRD package
36
–65
150 °C
(1) Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating
conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) This value is limited to 6 V maximum.
(3) This value is limited to 4.6 V maximum.
(4) The package thermal impedance is calculated in accordance with JESD 51-7.
3