MC79L05A Datasheet, PDF (3/8 Pages) Fairchild Semiconductor – 3-Terminal 0.1 A Negative Voltage Regulator-12

MC79L00 SERIES
NEGATIVE-VOLTAGE REGULATORS
SLVS011D – OCTOBER 1982 – REVISED AUGUST 2003
electrical characteristics at specified virtual junction temperature, V_I = –10 V, I_O = 40 mA (unless
otherwise noted)
PARAMETER
TEST CONDITIONS†
MC79L05C
MC79L05AC
TJ
UNIT
MIN TYP MAX MIN TYP MAX
25°C
–4.6
–5 –5.4 –4.8
–5 –5.2
Output voltage‡
Input regulation
Ripple rejection
Output regulation
Output noise voltage
VI = –7 V to –20 V,
IO = 1 mA to 40 mA
VI = –10 V, IO = 1 mA to 70 mA
VI = –7 V to –20 V
VI = –8 V to –20 V
VI = –8 V to –18 V, f = 120 Hz
IO = 1 mA to 100 mA
IO = 1 mA to 40 mA
f = 10 Hz to 100 kHz
0°C to 125°C –4.5
0°C to 125°C –4.5
25°C
25°C
40
25°C
25°C
–5.5 –4.75
–5.5 –4.75
200
150
49
41
60
30
40
–5.25 V
–5.25
150
mV
100
49
dB
60
mV
30
40
µV
Dropout voltage
Bias current
IO = 40 mA
25°C
25°C
125°C
1.7
6
5.5
1.7
V
6
mA
5.5
Bias current change
VI = –8 V to –20 V
0°C to 125°C
1.5
1.5
mA
IO = 1 mA to 40 mA
0.2
0.1
† _{All characteristics are measured with a 0.33-µF capacitor across the input and a 0.1-µF capacitor across the output. Pulse-testing techniques are}
used to maintain the junction temperature as close to the ambient temperature as possible. Thermal effects must be taken into account separately.
‡ _{This specification applies only for dc power dissipation permitted by absolute maximum ratings.}
electrical characteristics at specified virtual junction temperature, V_I = –19 V, I_O = 40 mA (unless
otherwise noted)
PARAMETER
TEST CONDITIONS†
MC79L12C
MC79L12AC
TJ
UNIT
MIN TYP MAX MIN TYP MAX
25°C
–11.1 –12 –12.9 –11.5 –12 –12.5
Output voltage‡
Input regulation
Ripple rejection
Output regulation
Output noise voltage
VI = –14.5 V to –27 V,
IO = 1 mA to 40 mA
VI = –19 V, IO = 1 mA to 70 mA
VI = –14.5 V to –27 V
VI = –16 V to –27 V
VI = –15 V to –25 V, f = 120 Hz
IO = 1 mA to 100 mA
IO = 1 mA to 40 mA
f = 10 Hz to 100 kHz
0°C to 125°C –10.8
0°C to 125°C –10.8
25°C
25°C
36
25°C
25°C
–13.2 –11.4
–13.2 –11.4
250
200
42
37
100
50
80
–12.6 V
–12.6
250
mV
200
42
dB
100
mV
50
80
µV
Dropout voltage
Bias current
IO = 40 mA
25°C
25°C
125°C
1.7
6.5
6
1.7
V
6.5
mA
6
Bias current change
VI = –16 V to –27 V
0°C to 125°C
1.5
1.5
mA
IO = 1 mA to 40 mA
0.2
0.1
† _{All characteristics are measured with a 0.33-µF capacitor across the input and a 0.1-µF capacitor across the output. Pulse-testing techniques are}
used to maintain the junction temperature as close to the ambient temperature as possible. Thermal effects must be taken into account separately.
‡ _{This specification applies only for dc power dissipation permitted by absolute maximum ratings.}
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265
3