LT1014D-EP Datasheet, PDF (3/21 Pages) Texas Instruments – QUAD PRECISION OPERATIONAL AMPLIFIER

LT1014D-EP
www.ti.com ........................................................................................................................................................................................... SLOS609 – DECEMBER 2008
ABSOLUTE MAXIMUM RATINGS
over operating free-air temperature range (unless otherwise noted) ⁽¹⁾
V_CC supply voltage⁽²⁾
Differential input voltage⁽³⁾
V_I Input voltage range (any input)⁽²⁾
Duration of short-circuit current⁽⁴⁾
Continuous total power dissipation
T_A ≤ 25°C
T_A Operating temperature range
T_stg Storage temperature range
Lead temperature 1,6 mm, at distance 1/16 inch from case for 10s
MIN
MAX UNIT
–22
22 V
–30
30 V
V_CC- – 5
V_CC+
V
Unlimited
See Dissipation Ratings Table
–55
125 °C
–65
150 °C
260 °C
(1) Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating
conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) All voltage values, except differential voltages, are with respect to the midpoint between V_CC+ and V_CC-.
(3) Differential voltages are at the noninverting input with respect to the inverting input.
(4) The output may be shorted to either supply.
DISSIPATION RATINGS
PACKAGE
DW
T_A ≤ 25°c
POWER RATING
1025 mV
DERATING
FACTOR
ABOVE T_A = 25°C
8.2 mW/°C
T_A = 70°C
POWER RATING
656 mW
T_A = 105°C
POWER RATING
369 mW
T_A = 125°C
POWER RATING
205 mW
ELECTRICAL CHARACTERISTICS
over operating free-air temperature range, V_CC+ = 5 V, V_CC- = 0, V_O = 1.4 V, V_IC = 0 (unless otherwise noted)
PARAMETER
V_IO
Input offset voltage
I_IO
Input offset current
TEST CONDITIONS
R_S = 50 Ω
R_S = 50 Ω, V_IC = 0.1 V
T_A ⁽¹⁾
25°C
Full range
125°C
25°C
Full range
MIN
TYP
90
400
200
0.2
I_IB
Input bias current
25°C
-15
Full range
V_ICR
Common-mode input voltage
range
25°C
Full range
0 to 3.5 -0.3 to 3.8
0.1 to 3
Output low, no load
25°C
15
V_OM
Maximum peak output
voltage swing
Ouput low, R_L = 600 Ω to GND
Output low, I_SINK = 1 mA
Output high, no load
25°C
Full range
25°C
25°C
5
220
4
4.4
Output high
25°C
3.4
4
A_VD
Large-signal differential
voltage amplification
R_L = 600 Ω to GND
V_O = 5 mV to 4 V, R_L = 500 Ω
Full range
25°C
3.1
1
I_CC
Supply current per amplifier
25°C
0.3
Full range
(1) Full range is -55°C to 125°C.
MAX
450
1500
750
2
10
-50
-120
UNIT
µV
nA
nA
V
25
10
mV
18
350
V
V/µV
0.5
mA
0.65
Copyright © 2008, Texas Instruments Incorporated
Submit Documentation Feedback
3
Product Folder Link(s): LT1014D-EP