 English |
|
|
|
|
|
|
|
| LP2980IM5X-3.3 Datasheet, PDF (3/25 Pages) Texas Instruments – Ultra Low Dropout Voltage, Output Voltage Accuracy 0.5% (A Grade) | |||
| |||
| ◁ |
LP2980-N
www.ti.com
SNOS733M â APRIL 2000 â REVISED JUNE 2013
ABSOLUTE MAXIMUM RATINGS(1)(2)
Storage Temperature Range
Operating Junction Temperature Range
Lead Temperature (Soldering, 5 sec.)
ESD Rating(3)
Power Dissipation(4)
Input Supply Voltage (Survival)
Input Supply Voltage (Operating)
Shutdown Input Voltage (Survival)
Output Voltage (Survival)(5)
IOUT (Survival)
Input-Output Voltage (Survival)(6)
â65°C to +150°C
â40°C to +125°C
260°C
2 kV
Internally Limited
â0.3V to +16V
2.1V to +16V
â0.3V to +16V
â0.3V to +9V
Short Circuit Protected
â0.3V to +16V
(1) Absolute Maximum Ratings indicate limits beyond which damage to the component may occur. Electrical specifications do not apply
when operating the device outside of its rated operating conditions.
(2) If Military/Aerospace specified devices are required, please contact the Texas Instruments Sales Office/ Distributors for availability and
specifications.
(3) The ESD rating of pins 3 and 4 for the SOT-23 package is 1 kV.
(4) The maximum allowable power dissipation is a function of the maximum junction temperature, TJ(MAX), the junction-to-ambient thermal
resistance, θJA, and the ambient temperature, TA. The maximum allowable power dissipation at any ambient temperature is calculated
using:
The value of θJA for the SOT-23 package is 220°C/W. Exceeding the maximum allowable power dissipation will cause excessive die
temperature, and the regulator will go into thermal shutdown.
(5) If used in a dual-supply system where the regulator load is returned to a negative supply, the LP2980-N output must be diode-clamped
to ground.
(6) The output PNP structure contains a diode between the VIN and VOUT terminals that is normally reverse-biased. Reversing the polarity
from VIN to VOUT will turn on this diode (See REVERSE CURRENT PATH).
ELECTRICAL CHARACTERISTICS
Limits in standard typeface are for TJ = 25°C, and limits in boldface type apply over the full operating temperature range.
Unless otherwise specified: VIN = VO(NOM) + 1V, IL = 1 mA, COUT = 1 μF, VON/OFF = 2V.
Symbol
Parameter
Conditions
Typ
LP2980AI-XX (1)
LP2980I-XX (1)
Units
Min
Max
Min
Max
IL = 1 mA
ÎVO
Output Voltage Tolerance
1 mA < IL < 50 mA
â0.50
0.50
â1.0
â0.75
0.75
â1.5
â2.5
2.5
â3.5
1.0
1.5
%VNOM
3.5
Output Voltage Line
Regulation
VO(NOM) + 1V ⤠VIN ⤠16V
0.007
0.014
0.032
0.014
0.032
%/V
VINâVO
Dropout Voltage(2)
IL = 0
IL = 1 mA
IL = 10 mA
IL = 50 mA
1
3
5
3
5
7
10
10
15
15
mV
40
60
90
60
90
120
150
225
150
225
(1) Limits are 100% production tested at 25°C. Limits over the operating temperature range are ensured through correlation using Statistical
Quality Control (SQC) methods. The limits are used to calculate Average Outgoing Quality Level (AOQL).
(2) Dropout voltage is defined as the input to output differential at which the output voltage drops 100 mV below the value measured with a
1V differential.
Copyright © 2000â2013, Texas Instruments Incorporated
Submit Documentation Feedback
3
Product Folder Links: LP2980-N
|
▷ |
German
Russian
Spanish
Italian
Polish
Chinese
Japanese
Korean
French
Portuguese