LMH6643MA Datasheet, PDF (3/32 Pages) Texas Instruments – LMH6642/LMH6643/LMH6644 Low Power, 130MHz, 75mA Rail-to-Rail Output Amplifiers

LMH6642, LMH6643, LMH6644
www.ti.com
SNOS966P – MAY 2001 – REVISED MARCH 2013
Operating Ratings ⁽¹⁾
Supply Voltage (V⁺ – V^−)
Junction Temperature Range ⁽²⁾
Package Thermal Resistance ⁽²⁾ (θ_JA)
5-Pin SOT-23
8-Pin SOIC
8-Pin VSSOP
14-Pin SOIC
14- Pin TSSOP
2.7V to 12.8V
−40°C to +85°C
265°C/W
190°C/W
235°C/W
145°C/W
155°C/W
(1) Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for
which the device is intended to be functional, but specific performance is not guaranteed. For guaranteed specifications and the test
conditions, see the Electrical Characteristics.
(2) The maximum power dissipation is a function of T_J(MAX), θ_JA, and T_A. The maximum allowable power dissipation at any ambient
temperature is P_D = (T_J(MAX) - T_A)/ θ_JA . All numbers apply for packages soldered directly onto a PC board.
3V Electrical Characteristics
Unless otherwise specified, all limits guaranteed for at T_J = 25°C, V⁺ = 3V, V^− = 0V, V_CM = V_O = V⁺/2, V_ID (input differential
voltage) as noted (where applicable) and R_L = 2kΩ to V⁺/2. Boldface limits apply at the temperature extremes.
Symbol
Parameter
Conditions
Min
Typ
Max
Units
(1)
(2)
(1)
BW
BW_0.1dB
PBW
e_n
i_n
THD
DG
DP
CT Rej.
T_S
SR
V_OS
TC V_OS
I_B
I_OS
R_IN
−3dB BW
0.1dB Gain Flatness
Full Power Bandwidth
Input-Referred Voltage Noise
Input-Referred Current Noise
Total Harmonic Distortion
Differential Gain
Differential Phase
Cross-Talk Rejection
Settling Time
Slew Rate ⁽³⁾
Input Offset Voltage
A_V = +1, V_OUT = 200mV_PP
A_V = +2, −1, V_OUT = 200mV_PP
A_V = +2, R_L = 150Ω to V+/2,
R_L = 402Ω, V_OUT = 200mV_PP
A_V = +1, −1dB, V_OUT = 1V_PP
f = 100kHz
f = 1kHz
f = 100kHz
f = 1kHz
f = 5MHz, V_O = 2V_PP, A_V = −1,
R_L = 100Ω to V⁺/2
V_CM = 1V, NTSC, A_V = +2
R_L =150Ω to V⁺/2
R_L =1kΩ to V⁺/2
V_CM = 1V, NTSC, A_V = +2
R_L =150Ω to V⁺/2
R_L =1kΩ to V⁺/2
f = 5MHz, Receiver:
R_f = R_g = 510Ω, A_V = +2
V_O = 2V_PP, ±0.1%, 8pF Load,
V_S = 5V
A_V = −1, V_I = 2V_PP
For LMH6642 and LMH6644
Input Offset Average Drift
Input Bias Current
For LMH6643
See ⁽⁴⁾
See ⁽⁵⁾
Input Offset Current
Common Mode Input Resistance
80
115
46
19
MHz
MHz
40
MHz
17
nV/√Hz
48
0.90
pA/√Hz
3.3
−48
dBc
0.17
%
0.03
0.05
deg
0.03
47
dB
68
ns
90
120
V/µs
±1
±5
±7
mV
±1
±3.4
±7
±5
µV/°C
−1.50
−2.60
−3.25
µA
20
800
1000
nA
3
MΩ
(1) All limits are guaranteed by testing or statistical analysis.
(2) Typical values represent the most likely parametric norm.
(3) Slew rate is the average of the rising and falling slew rates.
(4) Offset voltage average drift determined by dividing the change in V_OS at temperature extremes by the total temperature change.
(5) Positive current corresponds to current flowing into the device.
Copyright © 2001–2013, Texas Instruments Incorporated
Submit Documentation Feedback
3
Product Folder Links: LMH6642 LMH6643 LMH6644