LM385Z-2.5 Datasheet, PDF (3/22 Pages) Texas Instruments – LM185-2.5-N/LM285-2.5-N/LM385-2.5-N Micropower Voltage Reference Diode

LM185-2.5-N, LM285-2.5-N, LM385-2.5-N
www.ti.com
SNVS743D – DECEMBER 1999 – REVISED MARCH 2013
ELECTRICAL CHARACTERISTICS
Parameter
Reverse Breakdown
Voltage
Conditions
I_R = 100 μA
Minimum Operating
Current
Reverse Breakdown
Voltage Change with
Current
I_MIN ≤ I_R ≤ 1mA
1 mA ≤ I_R ≤ 20 mA
Reverse Dynamic
Impedance
Wideband Noise (rms)
Long Term Stability
Average Temperature Coefficient⁽⁴⁾
I_R = 100 μA,
f = 20 Hz
I_R = 100 μA
10 Hz ≤ f ≤ 10 kHz
I_R = 100 μA, T = 1000 Hr,
T_A = 25°C ±0.1°C
I_MIN ≤ I_R ≤ 20 mA
X Suffix
Y Suffix
All Others
Typ
2.500
2.500
12
0.2
120
LM385A-2.5-N
LM385AX-2.5-N
LM385AY-2.5-N
Tested Limit⁽²⁾ Design Limit⁽³⁾
2.480
2.520
2.470
2.530
18
20
1
1.5
10
20
0.6
1.5
Units
(Limits)
V(Min)
V(Max)
V(Min)
V(Max)
μA
(Max)
mV
(Max)
mV
(Max)
Ω
μV
20
ppm
30
ppm/°C
50
(Max)
150
(1) Parameters identified with boldface type apply at temperature extremes. All other numbers apply at T_A = T_J = 25°C.
(2) Specified and 100% production tested.
(3) Specified, but not 100% production tested. These limits are not used to calculate average outgoing quality levels.
(4) The average temperature coefficient is defined as the maximum deviation of reference voltage at all measured temperatures between
the operating T_MAX and T_MIN, divided by T_MAX–T_MIN. The measured temperatures are −55°C, −40°C, 0°C, 25°C, 70°C, 85°C, 125°C.
Copyright © 1999–2013, Texas Instruments Incorporated
Submit Documentation Feedback
3
Product Folder Links: LM185-2.5-N LM285-2.5-N LM385-2.5-N