DS90LV012ATMF Datasheet, PDF (3/18 Pages) Texas Instruments – DS90LV012A /DS90LT012A 3V LVDS Single CMOS Differential Line Receiver

DS90LT012A, DS90LV012A
www.ti.com
SNLS141D – AUGUST 2002 – REVISED APRIL 2013
Absolute Maximum Ratings ⁽¹⁾
Supply Voltage (V_DD)
Input Voltage (IN+, IN−)
Output Voltage (TTL OUT)
Output Short Circuit Current
Maximum Package Power Dissipation @ +25°C
NGK Package
Derate NGK Package
Thermal resistance (θ_JA)
DBV Package
Derate DBV Package
Thermal resistance (θ_JA)
Storage Temperature Range
Lead Temperature Range Soldering (4 sec.)
Maximum Junction Temperature
ESD Ratings ⁽²⁾
−0.3V to +4V
−0.3V to +3.9V
−0.3V to (V_DD + 0.3V)
−100mA
2.26 W
18.1 mW/°C above +25°C
55.3°C/W
902mW
7.22 mW/°C above +25°C
138.5°C/W
−65°C to +150°C
+260°C
+150°C
(1) “Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be ensured. They are not meant to imply
that the devices should be operated at these limits. Electrical Characteristics specifies conditions of device operation.
(2) ESD Ratings:
(a) DS90LV012A:
(a) HBM (1.5 kΩ, 100 pF) ≥ 2kV
(b) EIAJ (0Ω, 200 pF) ≥ 900V
(c) CDM ≥ 2000V
(d) IEC direct (330Ω, 150 pF) ≥ 5kV
(b) DS90LT012A:
(a) HBM (1.5 kΩ, 100 pF) ≥ 2kV
(b) EIAJ (0Ω, 200 pF) ≥ 700V
(c) CDM ≥ 2000V
(d) IEC direct (330Ω, 150 pF) ≥ 7kV
Recommended Operating Conditions
Supply Voltage (V_DD)
Operating Free Air Temperature (T_A)
Min
Typ
Max
+2.7
+3.3
+3.6
−40
25
+85
Units
V
°C
Electrical Characteristics
Over Supply Voltage and Operating Temperature ranges, unless otherwise specified. ^{(1) (2)}
(1) Current into device pins is defined as positive. Current out of device pins is defined as negative. All voltages are referenced to ground
unless otherwise specified (such as V_ID).
(2) All typicals are given for: V_DD = +3.3V and T_A = +25°C.
Copyright © 2002–2013, Texas Instruments Incorporated
Submit Documentation Feedback
3
Product Folder Links: DS90LT012A DS90LV012A