DRV602 Datasheet, PDF (3/12 Pages) Texas Instruments – DIRECTPATH™, 2Vrms Line Driver with Adjustable gain

DRV602
www.ti.com ........................................................................................................................................................................................... SLOS572 – DECEMBER 2008
ABSOLUTE MAXIMUM RATINGS⁽¹⁾⁽²⁾
over operating free-air temperature range
V_I
R_L
T_J
T_stg
ESD
Supply voltage, VDD to GND
Input voltage
Minimum load impedance
EN to GND
Maximum operating junction temperature range,
Storage temperature range
IEC Contact ESD Protection per IEC6100-4-2, on output pins measured on DRV602EVM
VALUE
–0.3 V to 5.5
V_SS – 0.3 to V_DD + 0.3
> 600
–0.3 to V_DD +0.3
0 to 70
–40 to 150
±8
UNIT
V
V
Ω
V
°C
°C
kV
(1) Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under recommended operating
conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) These voltages represents the DC voltage + peak AC waveform measured at the terminal of the device in all conditions.
T_A
0°C to 70°C
ORDERING INFORMATION
PACKAGE ⁽¹⁾
DRV602PW
DESCRIPTION
14-Pin TSSOP
(1) For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI
website at www.ti.com.
RECOMMENDED OPERATING CONDITIONS
V_DD
Supply voltage,
DC Supply Voltage
V_IH
High-level input voltage
EN
V_IL
Low-level input voltage
EN
T_A
Operating free-air temperature
MIN
TYP
MAX
UNIT
3
3.3
4.5
V
60
% of VDD
40
% of VDD
0
70
°C
ELECTRICAL CHARACTERISTICS
T_A = 25°C (unless otherwise noted)
PARAMETER
|V_OS| Output offset voltage
PSRR Supply Rejection Ratio
V_OH High-level output voltage
V_OL Low-level output voltage
|I_IH| High-level input current (EN)
|I_IL| Low-level input current (EN)
I_DD
Supply Current
TEST CONDITIONS
V_DD = 3 V to 4.5 V, Voltage follower - gain = 1
V_DD = 3.3 V to 4.5 V
V_DD = 3.3 V, R_L = 2.5 kΩ
V_DD = 3.3 V, R_L = 2.5 kΩ
V_DD = 4.5 V, V_I = V_DD
V_DD = 4.5 V, V_I = 0 V
V_DD = 3.3 V, No load, EN = V_DD
V_DD = 4.5 V, No load, EN = V_DD
Shutdown mode, Vdd = 3 V to 4.5 V
MIN TYP
88
3.10
8 11
12.5
MAX
5
–3.05
1
1
20
2
UNIT
mV
dB
V
V
µA
µA
mA
mA
Copyright © 2008, Texas Instruments Incorporated
3
Product Folder Link(s): DRV602