CDC204 Datasheet, PDF (3/7 Pages) Texas Instruments – HEX INVERTER/CLOCK DRIVER

CDC204
HEX INVERTER/CLOCK DRIVER
SCAS098E – OCTOBER 1989– REVISED OCTOBER 1998
electrical characteristics over recommended operating free-air temperature range (unless
otherwise noted)
PARAMETER
TEST CONDITIONS
IOH = – 50 µA
VCC = 4.75 V
VCC = 5.25 V
TA†
MIN
25°C
4.65
Full range
4.65
25°C
5.15
Full range
5.15
VOH High-level voltage output
IOH = – 24 mA
IOH = – 75 mA‡,
IOL = 50 µA
VCC = 4.75 V
VCC = 5.25 V
VCC = 5.25 V
VCC = 4.75 V
VCC = 5.25 V
25°C
4.19
Full range
4.05
25°C
4.68
Full range
4.55
Full range
3.6
25°C
Full range
25°C
Full range
VOL Low-level voltage output
II
Input current
IOL = 24 mA
IOL = 75 mA‡,
VI = VCC or GND
VCC = 4.75 V
VCC = 5.25 V
VCC = 5.25 V
VCC = 5.25 V
25°C
Full range
25°C
Full range
Full range
25°C
Full range
ICC Supply current
VI = VCC or GND,
IO = 0
VCC = 5.25 V,
25°C
Full range
Ci
Input capacitance
VI = VCC or GND, VCC = 5 V
25°C
† _{Full range is TA = 25°C to 70°C.}
‡ _{Not more than one output should be tested at a time, and the duration of the test should not exceed 10 ms.}
TYP MAX UNIT
V
0.1
0.1
0.1
0.1
0.36 V
0.44
0.36
0.44
1.65
± 0.1
µA
±1
4
µA
40
4
pF
switching characteristics over recommended operating free-air temperature range,
V_CC = 5 V ± 0.25 V (see Note 3 and Figures 1 and 2)
PARAMETER
FROM
(INPUT)
TO
(OUTPUT)
MIN
tPLH Propagation delay time, low-to-high level (see Figure 1)
tPHL Proagation delay time, high-to-low level (see Figure 1)
3.7
A
Y
2.9
tsk(o) Output skew time (see Figure 2)
A
Y
NOTE 3: All specifications are valid only for all outputs switching simultaneously and in phase.
MAX
5.7
5.7
1
UNIT
ns
ns
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265
3