CD54HC4066_07 Datasheet, PDF (3/18 Pages) Texas Instruments – High-Speed CMOS Logic Quad Bilateral Switch

CD54HC4066, CD74HC4066, CD74HCT4066
Absolute Maximum Ratings
DC Supply Voltage, V_CC
HCT Types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.5V to 7V
HC Types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.5V to 10.5V
DC Input Diode Current, I_IK
For V_I < -0.5V or V_I > V_CC + 0.5V . . . . . . . . . . . . . . . . . . . . . .±20mA
DC Switch Current, I_O (Note 1)
For -0.5V < V_O < V_CC + 0.5V. . . . . . . . . . . . . . . . . . . . . . . . . .±25mA
DC Output Diode Current, I_OK
For V_O < -0.5V or V_O > V_CC + 0.5V . . . . . . . . . . . . . . . . . . . .±20mA
DC Output Source or Sink Current per Output Pin, I_O
For V_O > -0.5V or V_O < V_CC + 0.5V . . . . . . . . . . . . . . . . . . . .±25mA
DC V_CC or Ground Current, I_CC . . . . . . . . . . . . . . . . . . . . . . . . .±50mA
Thermal Information
Thermal Resistance (Typical, Note 2)
θ_JA
E (PDIP) Package . . . . . . . . . . . . . . . . . . . . . . . . . . 80^oC/W
M (SOIC) Package. . . . . . . . . . . . . . . . . . . . . . . . . . 86^oC/W
PW (TSSOP) Package . . . . . . . . . . . . . . . . . . . . . . 113^oC/W
Maximum Junction Temperature (Hermetic Package or Die) . . . 175^oC
Maximum Junction Temperature (Plastic Package) . . . . . . . . 150^oC
Maximum Storage Temperature Range . . . . . . . . . .-65^oC to 150^oC
Maximum Lead Temperature (Soldering 10s) . . . . . . . . . . . . . 300^oC
(SOIC - Lead Tips Only)
Operating Conditions
Temperature Range, T_A . . . . . . . . . . . . . . . . . . . . . . -55^oC to 125^oC
Supply Voltage Range, V_CC
HC Types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2V to 10V
HCT Types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4.5V to 5.5V
DC Input or Output Voltage, V_I, V_O . . . . . . . . . . . . . . . . . 0V to V_CC
Input Rise and Fall Time
2V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1000ns (Max)
4.5V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 500ns (Max)
6V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 400ns (Max)
CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation
of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied.
NOTES:
1. In certain applications, the external load-resistor current may include both V_CC and signal-line components. To avoid drawing V_CC current
when switch current flows into the transmission gate inputs, (terminals 1, 4, 8 and 11) the voltage drop across the bidirectional switch
must not exceed 0.6V (calculated from R_ON values shown in the DC Electrical Specifications Table). No V_CC current will flow through
R_Lif the switch current flows into terminals 2, 3, 9 and 10.
2. The package thermal impedance is calculated in accordance with JESD 51-7.
DC Electrical Specifications
PARAMETER
HC TYPES
High Level Input
Voltage
Low Level Input
Voltage
Input Leakage
Current
(Any Control)
Off-Switch Leakage
Current
SYMBOL
TEST
CONDITIONS
25^oC
V_I (V) V_IS (V) V_CC (V) MIN TYP MAX
V_IH
-
-
V_IL
-
-
I_IL
V_CC or
-
GND
2
1.5 -
-
4.5 3.15 -
-
9
6.3 -
-
2
-
- 0.5
4.5
-
- 1.35
9
-
- 2.7
10
-
- ±0.1
I_Z
V_IL
V_CC or
10
-
- ±0.1
GND
-40^oC TO 85^oC
MIN MAX
1.5
-
3.15
-
6.3
-
-
0.5
-
1.35
-
2.7
-
±1
-
±1
-55^oC TO 125^oC
MIN MAX UNITS
1.5
-
V
3.15
-
V
6.3
-
V
-
0.5
V
-
1.35
V
-
2.7
V
-
±1
µA
-
±1
µA
3