AM26LV32C Datasheet, PDF (3/21 Pages) Texas Instruments – LOW-VOLTAGE HIGH-SPEED QUADRUPLE DIFFERENTIAL LINE RECEIVER

AM26LV32C, AM26LV32I
LOWĆVOLTAGE HIGHĆSPEED QUADRUPLE DIFFERENTIAL LINE RECEIVER
schematics of equivalent inputs and outputs
SLLS202E − MAY 1995 − REVISED JUNE 2005
EQUIVALENT OF EACH INPUT (A, B)
VCC
EQUIVALENT OF EACH
ENABLE INPUT (G, G)
VCC
7.2 kΩ
TYPICAL OF ALL OUTPUTS (Y)
VCC
1.5 kΩ
100 Ω
Enable
Y
A, B
G, G
15 kΩ _{1.5 kΩ}
GND
7.2 kΩ
GND
GND
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)^†
Supply voltage range, V_CC (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −0.3 V to 6 V
Input voltage range, V_I (A or B inputs) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −4 V to 8 V
Differential input voltage, V_ID (see Note 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±12 V
Enable input voltage range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −0.3 V to 6 V
Output voltage range, V_O . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −0.3 V to 6 V
Maximum output current, I_O . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±25 mA
Package thermal impedance, θ_JA (see Note 3): D package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73°C/W
NS package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64°C/W
Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260°C
Storage temperature range, T_stg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −65°C to 150°C
† _{Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and}
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTES: 1. All voltage values are with respect to the GND terminal.
2. Differential input voltage is measured at the noninverting input with respect to the corresponding inverting input.
3. The package thermal impedance is calculated in accordance with JESD 51.
recommended operating conditions
Supply voltage, VCC
High-level input voltage, VIH(EN)
Low-level input voltage, VIL(EN)
Common-mode input voltage, VIC
Differential input voltage, VID
High-level output current, IOH
Low-level output current, IOL
Operating free-air temperature, TA
AM26LV32C
AM26LV32I
MIN NOM MAX UNIT
3 3.3 3.6 V
2
V
0.8 V
−0.3
5.5 V
± 5.8
−5 mA
5 mA
0
70
°C
−40
85
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265
3