CC2510FX Datasheet, PDF (27/244 Pages) List of Unclassifed Manufacturers – True System-on-Chip with Low Power RF Transceiver and 8051 MCU

CC2510Fx / CC2511Fx
Pin Pin Name
Pin Type
Description
-
AGND
Ground
The exposed die attach pad must be connected to a solid ground plane
1
P1_2
D I/O
Port 1.2
2
DVDD
Power (Digital) 2.0 V - 3.6 V digital power supply for digital I/O
3
P1_1
D I/O
Port 1.1
4
P1_0
D I/O
Port 1.0
5
P0_0
D I/O
Port 0.0
6
P0_1
D I/O
Port 0.1
7
P0_2
D I/O
Port 0.2
8
P0_3
D I/O
Port 0.3
9
P0_4
D I/O
Port 0.4
10 DVDD
Power (Digital) 2.0 V - 3.6 V digital power supply for digital I/O
11 P0_5
D I/O
Port 0.5
12 P0_6
D I/O
Port 0.6
13 P0_7
D I/O
Port 0.7
14 P2_0
D I/O
Port 2.0
15 P2_1
D I/O
Port 2.1
16 P2_2
D I/O
Port 2.2
17 P2_3/XOSC32_Q1 D I/O
Port 2.3/32.768 kHz crystal oscillator pin 1
18 P2_4/XOSC32_Q2 D I/O
Port 2.4/32.768 kHz crystal oscillator pin 2
19 AVDD
Power (Analog) 2.0 V - 3.6 V analog power supply connection
20 XOSC_Q2
Analog I/O
Crystal oscillator pin 2
21 XOSC_Q1
Analog I/O
Crystal oscillator pin 1, or external clock input
22 AVDD
23 RF_P
24 RF_N
Power (Analog)
RF I/O
RF I/O
2.0 V - 3.6 V analog power supply connection
Positive RF input signal to LNA in receive mode
Positive RF output signal from PA in transmit mode
Negative RF input signal to LNA in receive mode
Negative RF output signal from PA in transmit mode
25 AVDD
Power (Analog) 2.0 V - 3.6 V analog power supply connection
26 AVDD
Power (Analog) 2.0 V - 3.6 V analog power supply connection
27 RBIAS
Analog I/O
External precision bias resistor for reference current
28 GUARD
Power (Digital) Power supply connection for digital noise isolation
29 AVDD_DREG
Power (Digital) 2.0 V - 3.6 V digital power supply for digital core voltage regulator
30 DCOUPL
Power
decoupling
1.8 V digital power supply decoupling
31 RESET_N
DI
Reset, active low
32 P1_7
D I/O
Port 1.7
33 P1_6
D I/O
Port 1.6
34 P1_5
D I/O
Port 1.5
35 P1_4
D I/O
Port 1.4
36 P1_3
D I/O
Port 1.3
Table 25: CC2510Fx Pin-out Overview
SWRS055F
Page 27 of 241