JBP28S42 Datasheet, PDF (25/26 Pages) Texas Instruments – STANDARD AND LOW POWER PROGRAMMABLE READ ONLY MEMORIES

www.ti.com
PACKAGE OPTION ADDENDUM
28-Feb-2005
PACKAGING INFORMATION
Orderable Device
JBP28L22MJ
JBP28L42MJ
JBP28S42MJ
Status ⁽¹⁾
ACTIVE
ACTIVE
ACTIVE
Package
Type
CDIP
CDIP
CDIP
Package
Drawing
J
J
J
Pins Package Eco Plan ⁽²⁾
Qty
20
1
None
20
1
None
20
1
None
Lead/Ball Finish MSL Peak Temp ⁽³⁾
Call TI
Call TI
Call TI
Level-NC-NC-NC
Level-NC-NC-NC
Level-NC-NC-NC
(1) _{The marketing status values are defined as follows:}
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in
a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2) _{Eco Plan - May not be currently available - please check http://www.ti.com/productcontent for the latest availability information and additional}
product content details.
None: Not yet available Lead (Pb-Free).
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements
for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered
at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Green (RoHS & no Sb/Br): TI defines "Green" to mean "Pb-Free" and in addition, uses package materials that do not contain halogens,
including bromine (Br) or antimony (Sb) above 0.1% of total product weight.
(3) _{MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDECindustry standard classifications, and peak solder}
temperature.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is
provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the
accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take
reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on
incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited
information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI
to Customer on an annual basis.
Addendum-Page 1