LM3S6911 Datasheet, PDF (230/514 Pages) Texas Instruments – Stellaris LM3S6911 Microcontroller

General-Purpose Timers
Bit/Field
1
0
Name
TASTALL
TAEN
Type
R/W
R/W
Reset
0
0
Description
GPTM Timer A Stall Enable
The TASTALL values are defined as follows:
Value Description
0 Timer A continues counting while the processor is halted by the
debugger.
1 Timer A freezes counting while the processor is halted by the
debugger.
If the processor is executing normally, the TASTALL bit is ignored.
GPTM TimerA Enable
The TAEN values are defined as follows:
Value Description
0 TimerA is disabled.
1 TimerA is enabled and begins counting or the capture logic is
enabled based on the GPTMCFG register.
230
April 05, 2010
Texas Instruments-Production Data