CC2543_15 Datasheet, PDF (22/30 Pages) Texas Instruments – System-on-Chip for 2.4-GHz RF Applications

CC2543
SWRS107E – APRIL 2012 – REVISED OCTOBER 2013
www.ti.com
Crystal
An external 32-MHz crystal with two loading capacitors is used for the 32-MHz crystal oscillator. The load
capacitance seen by the 32-MHz crystal is given by:
C_L =
1
1₊
1
+ C_parasitic
C₁₆₁ C₁₇₁
(1)
A series resistor may be used to comply with ESR requirement.
On-Chip 1.8-V Voltage Regulator Decoupling
The 1.8-V on-chip voltage regulator supplies the 1.8-V digital logic. This regulator requires a decoupling capacitor
(C301) for stable operation.
Power-Supply Decoupling and Filtering
Proper power-supply decoupling must be used for optimum performance. The placement and size of the
decoupling capacitors and the power supply filtering are very important to achieve the best performance in an
application. TI provides a compact reference design that should be followed very closely.
SPACER
REVISION HISTORY
Changes from Original (April 2012) to Revision A
Page
• Changed data sheet status from Product Preview to Production Data ................................................................................ 1
Changes from Revision A (April 2012) to Revision B
Page
• Added Comparator Characteristics specifications ................................................................................................................ 7
• Added ADC Characteristics specifications ........................................................................................................................... 8
Changes from Revision B (May 2012) to Revision C
Page
• Changed the Temperature coefficient Unit value From: mV/°C To: / 0.1°C ......................................................................... 7
Changes from Revision C (August 2012) to Revision D
Page
• Changed the Pin Package From: RHM to: RHB ................................................................................................................. 13
Changes from Revision D (November 2012) to Revision E
Page
• Changed the ADC CHARACTERISTICS Test Conditions From: VDD is voltage on AVDD5 pin To: VDD is voltage
from supply ........................................................................................................................................................................... 8
22
Submit Documentation Feedback
Product Folder Links :CC2543
Copyright © 2012–2013, Texas Instruments Incorporated