OPA171-Q1_15 Datasheet, PDF (21/36 Pages) Texas Instruments – OPAx171-Q1 36-V, Single-Supply, General-Purpose Operational Amplifier

www.ti.com
10.2 Layout Example
OPA171-Q1, OPA2171-Q1, OPA4171-Q1
SBOS556B – JUNE 2011 – REVISED DECEMBER 2014
RIN
VIN
RG
+
RF
VOUT
(Schematic Representation)
Run the input traces
as far away from
the supply lines
as possible
Place components
close to device and to
each other to reduce
parasitic errors
RG
GND
RF
NC
±IN
VIN
+IN
RIN
V±
NC
V+
OUT
NC
VS+
GND
Use low-ESR, ceramic
bypass capacitor
Only needed for
dual-supply
operation
GND
VS±
(or GND for single supply)
VOUT
Ground (GND) plane on another layer
Figure 44. Operational Amplifier Board Layout for Noninverting Configuration
11 Device and Documentation Support
11.1 Documentation Support
11.1.1 Related Documentation
For related documentation see the following:
• Applications Bulletin AB-028, SBOA015
• Capacitive Load Drive Solution using an Isolation Resistor, TIDU032
• Circuit Board Layout Techniques, SLOA089
11.2 Related Links
The table below lists quick access links. Categories include technical documents, support and community
resources, tools and software, and quick access to sample or buy.
PARTS
OPA171-Q1
OPA2171-Q1
OPA4171-Q1
PRODUCT FOLDER
Click here
Click here
Click here
Table 4. Related Links
SAMPLE & BUY
Click here
Click here
Click here
TECHNICAL
DOCUMENTS
Click here
Click here
Click here
TOOLS &
SOFTWARE
Click here
Click here
Click here
SUPPORT &
COMMUNITY
Click here
Click here
Click here
11.3 Trademarks
All trademarks are the property of their respective owners.
Copyright © 2011–2014, Texas Instruments Incorporated
Submit Documentation Feedback
21
Product Folder Links: OPA171-Q1 OPA2171-Q1 OPA4171-Q1