TPD2E007 Datasheet, PDF (2/9 Pages) Texas Instruments – 2-CHANNEL ESD-PROTECTION ARRAY FOR AC-COUPLED/NEGATIVE-RAIL DATA INTERFACES

TPD2E007
SLVS796D – SEPTEMBER 2008 – REVISED OCTOBER 2009 ........................................................................................................................................ www.ti.com
T_A
–40°C to 85°C
–40°C to 85°C
ORDERING INFORMATION
PACKAGE ^{(1) (2)}
ORDERABLE PART NUMBER
DSLGA – YFM
Tape and reel
TPD2E007YFMRG4
3-DCK
Tape and reel
TPD2E007DCKR
TOP-SIDE MARKING
45
T
45U
(1) Package drawings, thermal data, and symbolization are available at www.ti.com/packaging.
(2) For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI
website at www.ti.com.
EQUIVALENT SCHEMATIC REPRESENTATION
IO1
IO2
GND
ABSOLUTE MAXIMUM RATINGS⁽¹⁾
over operating free-air temperature range (unless otherwise noted)
V_IO
Continuous power dissipation
(T_A = 70°C)
Operating temperature range
T_stg Storage temperature range
T_J
Junction temperature
Bump temperature (soldering)
Lead temperature (soldering, 10 s)
YFM package
Infrared (15 s)
Vapor phase (60 s)
MIN
–13.5
–40
–65
MAX UNIT
13.5 V
270 mW
85 °C
150 °C
150 °C
220
°C
215
300 °C
(1) Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the
specifications is not implied. Exposure to absolute maximum-rated conditions for extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICS
T_A = –40°C to 85°C (unless otherwise noted)
PARAMETER
TEST CONDITIONS
V_BR
Break-down voltage
I_IO
Channel leakage current
R_d
Dynamic resistance
C_IN
Channel input capacitance
I_IO = 10 mA
V_IO = 2.5 V
(1) Typical values are at V_CC = 5 V and T_A = 25°C.
MIN
TYP ⁽¹⁾
±14
20
3.5
10
MAX
50
15
UNIT
V
nA
Ω
pF
ESD Protection
HBM
IEC 61000-4-2 Contact Discharge
IEC 61000-4-2 Air-Gap Discharge
PARAMETER
TYP UNIT
±15
kV
±8
kV
±15
kV
2
Submit Documentation Feedback
Product Folder Link(s): TPD2E007
Copyright © 2008–2009, Texas Instruments Incorporated