English
Language : 

TLC59461 Datasheet, PDF (2/33 Pages) Texas Instruments – 16-Channel, 12-Bit PWM LED Driver with 6-Bit Dot Correction
◁
TLC59461
SLVS896A – NOVEMBER 2008 – REVISED MARCH 2009............................................................................................................................................... www.ti.com
This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with
appropriate precautions. Failure to observe proper handling and installation procedures can cause damage.
ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more
susceptible to damage because very small parametric changes could cause the device not to meet its published specifications.
PACKAGE/ORDERING INFORMATION(1)
PRODUCT
TLC59461
PACKAGE-LEAD
HTSSOP-28 PowerPAD™
ORDERING NUMBER
TLC59461PWPR
TLC59461PWP
TRANSPORT MEDIA,
QUANTITY
Tape and Reel, 2000
Tube, 50
(1) For the most current package and ordering information see the Package Option Addendum at the end of this document, or see the TI
web site at www.ti.com.
ABSOLUTE MAXIMUM RATINGS(1)(2)
Over operating free-air temperature range, unless otherwise noted.
VCC
IOUT
VIN
VOUT
TJ(ABS)
TSTG
PARAMETER
Supply voltage: VCC
Output current (dc)
OUT0 to OUT15
XERR
Input voltage range: SIN, SCLK, GSCLK, XLAT, BLANK, MODE, XHALF,
IREF
Output voltage range
SOUT, XERR
OUT0 to OUT15
Operating temperature range: junction temperature
Storage temperature range
ESD rating
Human body model (HBM),
JEDEC JESD22-A114
Charged device model (CDM),
JEDEC JESD22-C101
TLC59461
–0.3 to +6.0
50
6
–0.3 to VCC + 0.3
–0.3 to VCC + 0.3
–0.3 to +18
–40 to +150
–55 to +150
2
500
UNIT
V
mA
mA
V
V
V
°C
°C
kV
V
(1) Stresses above these ratings may cause permanent damage. Exposure to absolute maximum conditions for extended periods may
degrade device reliability. These are stress ratings only, and functional operation of the device at these or any other conditions beyond
those specified is not supported.
(2) All voltage values are with respect to network ground terminal.
DISSIPATION RATINGS
PACKAGE
HTSSOP-28 with
PowerPAD soldered(1)
HTSSOP-28 with
PowerPAD not soldered(2)
OPERATING FACTOR
ABOVE TA = +25°C
31.67 mW/°C
16.21 mW/°C
TA < +25°C
POWER RATING
3958 mW
2026 mW
TA = +70°C
POWER RATING
2533 mW
1296 mW
TA = +85°C
POWER RATING
2058 mW
1053 mW
(1) With PowerPAD soldered onto copper area on printed circuit board (PCB); 2 oz. copper. For more information, see SLMA002 (available
for download at www.ti.com).
(2) With PowerPAD not soldered onto copper area on PCB.
2
Submit Documentation Feedback
Product Folder Link(s): TLC59461
Copyright © 2008–2009, Texas Instruments Incorporated
 ▷