TLC27L4 Datasheet, PDF (2/37 Pages) Texas Instruments – LinCMOSE PRECISION QUAD OPERATIONAL AMPLIFIERS

TLC27L4, TLC27L4A, TLC27L4B, TLC27L4Y, TLC27L9
LinCMOS™ PRECISION QUAD OPERATIONAL AMPLIFIERS
SLOS053C – OCTOBER 1987 – REVISED AUGUST 1994
description (continued)
In general, many features associated with bipolar technology are available on LinCMOS™ operational
amplifiers, without the power penalties of bipolar technology. General applications such as transducer
interfacing, analog calculations, amplifier blocks, active filters, and signal buffering are easily designed with the
TLC27L4 and TLC27L9. The devices also exhibit low voltage single-supply operation and ultra-low power
consumption, making them ideally suited for remote and inaccessible battery-powered applications. The
common-mode input voltage range includes the negative rail.
A wide range of packaging options is available, including small-outline and chip-carrier versions for high-density
system applications.
The device inputs and outputs are designed to withstand –100-mA surge currents without sustaining latch-up.
The TLC27L4 and TLC27L9 incorporate internal ESD-protection circuits that prevent functional failures at
voltages up to 2000 V as tested under MIL-STD-883C, Method 3015.2; however, care should be exercised in
handling these devices, as exposure to ESD may result in the degradation of the device parametric
performance.
The C-suffix devices are characterized for operation from 0°C to 70°C. The I-suffix devices are characterized
for operation from – 40°C to 85°C. The M-suffix devices are characterized for operation from – 55°C to 125°C.
AVAILABLE OPTIONS
PACKAGED DEVICES
TA
VIOmax
AT 25°C
SMALL
OUTLINE
CHIP
CARRIER
CERAMIC
DIP
PLASTIC
DIP
(D)
(FK)
(J)
(N)
900 µV TLC27L9CD
—
—
TLC27L9CN
0°C to 70°C
2 mV TLC27L4BCD
—
5 mV TLC27L4ACD
—
—
TLC27L4BCN
—
TLC27L4ACN
10 mV TLC27L4CD
—
—
TLC27L4CN
900 µV TLC27L9ID
—
—
TLC27L9IN
2 mV TLC27L4BID
—
– 40°C to 85°C
5 mV TLC27L4AID
—
—
TLC27L4BIN
—
TLC27L4AIN
10 mV TLC27L4ID
—
—
TLC27L4IN
– 55°C to 125°C
900 µV
10 mV
TLC27L9MD
TLC27L4MD
TLC27L9MFK TLC27L9MJ TLC27L9MN
TLC27L4MFK TLC27L4MJ TLC27L4MN
The D package is available taped and reeled. Add R suffix to the device type (e.g., TLC27L9CDR).
TSSOP
(PW)
—
—
—
TLC27L4CPW
—
—
—
—
—
—
CHIP
FORM
(Y)
—
—
—
TLC27L4Y
—
—
—
—
—
—
2
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265