SN74LVCH245 Datasheet, PDF (2/7 Pages) Texas Instruments – OCTAL BUS TRANSCEIVER WITH 3-STATE OUTPUTS

SN74LVCH245
OCTAL BUS TRANSCEIVER
WITH 3-STATE OUTPUTS
SCES008 – JULY 1995
logic symbol^†
logic diagram (positive logic)
19
OE
1
DIR
G3
3EN1[BA]
3EN2[AB]
DIR ¹
19 _OE
2
A1
3
A2
4
A3
5
A4
6
A5
7
A6
8
A7
9
A8
1
2
18
B1
17
B2
16
B3
15
B4
14
B5
13
B6
12
B7
11
B8
A1 ²
To Seven Other Channels
18
B1
† _{This symbol is in accordance with ANSI/IEEE Std 91-1984 and}
IEC Publication 617-12.
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)^‡
Supply voltage range, V_CC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 0.5 V to 6.5 V
Input voltage range, V_I (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 0.5 V to 6.5 V
Voltage range applied to any output in the high-impedance
or power-off state, V_O (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 0.5 V to 6.5 V
Voltage range applied to any output in the high
or low state, V_O (see Notes 1 and 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 0.5 V to V_CC + 0.5 V
Input clamp current, I_IK (V_I < 0 ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 50 mA
Output clamp current, I_OK (V_O < 0) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ± 50 mA
Continuous output current, I_O (V_O = 0 to V_CC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ± 50 mA
Continuous current through V_CC or GND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ± 100 mA
Maximum power dissipation at T_A = 55°C (in still air) (see Note 3): DB package . . . . . . . . . . . . . . . . . . 0.6 W
DW package . . . . . . . . . . . . . . . . . 1.6 W
PW package . . . . . . . . . . . . . . . . . . 0.7 W
Storage temperature range, T_stg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 65°C to 150°C
‡ _{Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and}
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTES: 1. The input and output negative-voltage ratings may be exceeded if the input and output clamp-current ratings are observed.
2. This value is limited to 4.6 V maximum.
3. The maximum package power dissipation is calculated using a junction temperature of 150°C and a board trace length of 750 mils.
For more information, refer to the Package Thermal Considerations application note in the 1994 ABT Advanced BiCMOS Technology
Data Book, literature number SCBD002B.
2
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265