SN74ALVC162836_06 Datasheet, PDF (2/10 Pages) Texas Instruments – 20-BIT UNIVERSAL BUS DRIVER WITH 3-STATE OUTPUTS

SN74ALVC162836
20-BIT UNIVERSAL BUS DRIVER
WITH 3-STATE OUTPUTS
SCES129E – MARCH 1998 – REVISED OCTOBER 2004
OE
H
L
L
L
L
L
FUNCTION TABLE
INPUTS
LE
CLK
A
X
X
X
L
X
L
L
X
H
H
↑
L
H
↑
H
H
L or H
X
OUTPUT
Y
Z
L
H
L
H
Y₀ ⁽¹⁾
(1) Output level before the indicated steady-state input conditions
were established, provided that CLK is high before LE goes high
LOGIC DIAGRAM (POSITIVE LOGIC)
1
OE
56
CLK
29
LE
55
A1
1D
C1
CLK
2
Y1
www.ti.com
To 19 Other Channels
ABSOLUTE MAXIMUM RATINGS⁽¹⁾
over operating free-air temperature range (unless otherwise noted)
V_CC Supply voltage range
V_I
Input voltage range⁽²⁾
V_O
Output voltage range⁽²⁾⁽³⁾
I_IK
Input clamp current
I_OK Output clamp current
I_O
Continuous output current
Continuous current through each V_CC or GND
θ_JA
Package thermal impedance⁽⁴⁾
T_stg Storage temperature range
V_I < 0
V_O < 0
DGG package
DGV package
DL package
MIN
MAX
-0.5
4.6
-0.5
4.6
-0.5 V_CC + 0.5
-50
-50
±50
±100
64
48
56
-65
150
UNIT
V
V
V
mA
mA
mA
mA
°C/W
°C
(1) Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating
conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) The input negative-voltage and output voltage ratings may be exceeded if the input and output current ratings are observed.
(3) This value is limited to 4.6 V maximum.
(4) The package thermal impedance is calculated in accordance with JESD 51-7.
2