 English |
|
|
|
|
|
|
|
| OPA364AIDBVRG4 Datasheet, PDF (2/37 Pages) Texas Instruments – Single-Supply, Rail-to-Rail I/O Operational Amplifier | |||
| |||
| ◁ |
OPA363, OPA2363
OPA364, OPA2364, OPA4364
SBOS259C â SEPTEMBER 2002 â REVISED MAY 2013
www.ti.com
This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with
appropriate precautions. Failure to observe proper handling and installation procedures can cause damage.
ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more
susceptible to damage because very small parametric changes could cause the device not to meet its published specifications.
PACKAGE AND ORDERING INFORMATION(1)
(1) For the most current package and ordering information, see the Package Option Addendum at the end of this document, or visit the
device product folder at www.ti.com.
ABSOLUTE MAXIMUM RATINGS(1)
Over operating free-air temperature range, unless otherwise noted.
Supply voltage
Signal input terminals
Output short-circuit(3)
Operating temperature, TA
Storage temperature, Tstg
Junction temperature, TJ
Voltage (2)
Current (2)
VALUE
+5.5
â0.5 to (V+) + 0.5
±10
Continuous
â40 to +150
â65 to +150
+150
UNIT
V
V
mA
mA
°C
°C
°C
(1) Stresses above these ratings may cause permanent damage. Exposure to absolute maximum conditions for extended periods may
degrade device reliability. These are stress ratings only, and functional operation of the device at these or any other conditions beyond
those specified is not implied.
(2) Input terminals are diode-clamped to the power-supply rails. Input signals that can swing more than 0.5V beyond the supply rails should
be current limited to 10mA or less.
(3) Short-circuit to ground, one amplifier per package.
ELECTRICAL CHARACTERISTICS: VS = +1.8V to +5.5V
Boldface limits apply over the specified temperature range, TA = â40°C to +125°C.
At TA = +25°C, RL = 10k⦠connected to VS/2, VOUT = VS/2, and VCM = VS/2, unless otherwise noted.
OPAx363, OPAx364
PARAMETER
CONDITIONS
MIN
TYP
MAX
OFFSET VOLTAGE
Input Offset Voltage, OPA363I, OPA364I
VOS
VS = +5V
500
OPA2363I, OPA2364I
900
OPA363AI, OPA364AI, OPA2363AI, OPA2364AI,
OPA4364AI
1
2.5
Drift
vs Power Supply
Channel Separation, dc
dVOS/dT
PSRR
VS = 1.8V to 5.5V, VCM = 0
3
80
330
1
INPUT BIAS CURRENT
Input Bias Current
IB
over Temperature
±1
±10
See Typical Characteristics
Input Offset Current
IOS
NOISE
±1
±10
Input Voltage Noise, f = 0.1Hz to 10Hz
en
10
Input Voltage Noise Density, f = 10kHz
en
17
Input Current Noise Density, f = 10kHz
in
0.6
INPUT VOLTAGE RANGE
Common-Mode Voltage Range
Common-Mode Rejection Ratio
VCM
CMRR
(Vâ) â 0.1V < VCM < (V+) + 0.1V
(Vâ) â 0.1
(V+) + 0.1
74
90
UNIT
μV
μV
mV
μV/°C
μV/V
μV/V
pA
pA
µVPP
nV/âHz
fA/âHz
V
dB
2
Submit Documentation Feedback
Copyright © 2002â2013, Texas Instruments Incorporated
Product Folder Links: OPA363 OPA2363 OPA364 OPA2364 OPA4364
|
▷ |
German
Russian
Spanish
Italian
Polish
Chinese
Japanese
Korean
French
Portuguese