OPA188_13 Datasheet, PDF (2/33 Pages) Texas Instruments – Precision, Low-Noise, Rail-to-Rail Output,36-V, Zero-Drift Operational Amplifiers

OPA188
SBOS642A – MARCH 2013 – REVISED MARCH 2013
www.ti.com
This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with
appropriate precautions. Failure to observe proper handling and installation procedures can cause damage.
ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more
susceptible to damage because very small parametric changes could cause the device not to meet its published specifications.
PRODUCT
OPA188
PACKAGE INFORMATION⁽¹⁾
PACKAGE-LEAD
PACKAGE DESIGNATOR
SOT23-5
DBV
SO-8
D
MSOP-8
DGK
SPECIFIED TEMPERATURE RANGE
–40°C to +125°C
–40°C to +125°C
–40°C to +125°C
(1) For the most current package and ordering information, see the Package Option Addendum at the end of this document, or visit the
device product folder at www.ti.com.
ABSOLUTE MAXIMUM RATINGS⁽¹⁾
Supply voltage
Signal input terminals⁽²⁾
Output short-circuit⁽³⁾
Temperature range
Electrostatic discharge (ESD) ratings
Voltage
Current
Differential
Operating⁽⁴⁾, T_A
Storage, T_stg
Junction, T_J
Human body model (HBM)
Charged device model (CDM)
VALUE
±20, 40 (single supply)
(V–) – 0.5 to (V+) + 0.5
±10
±0.7
Continuous
–55 to +150
–65 to +150
+150
1.5
1
UNIT
V
V
mA
V
°C
°C
°C
kV
kV
(1) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings
only, and do not imply functional operation of the device at these or any other conditions beyond those indicated. Exposure to absolute-
maximum-rated conditions for extended periods may affect device reliability.
(2) Input terminals are diode-clamped to the power-supply rails. Input signals that can swing more than 0.5 V beyond the supply rails should
be current-limited to 10 mA or less.
(3) Short-circuit to ground, V-, or V+.
(4) Provided device does not exceed maximum junction temperature (T_J) at any time.
2
Submit Documentation Feedback
Product Folder Links: OPA188
Copyright © 2013, Texas Instruments Incorporated