DS90C401MX Datasheet, PDF (2/17 Pages) Texas Instruments – DS90C401 Dual Low Voltage Differential Signaling (LVDS) Driver

DS90C401
NRND
SNLS002C – JUNE 1998 – REVISED APRIL 2013
www.ti.com
Absolute Maximum Ratings⁽¹⁾⁽²⁾
Supply Voltage (V_CC)
Input Voltage (D_IN)
Output Voltage (D_OUT+, D_OUT−)
Short Circuit Duration
(D_OUT+, D_OUT−)
Maximum Package Power Dissipation @ +25°C
Storage Temperature Range
Lead Temperature Range
Soldering (4 sec.)
Maximum Junction Temperature
ESD Rating⁽³⁾
D Package
Derate D Package
(HBM, 1.5 kΩ, 100 pF)
(EIAJ, 0 Ω, 200 pF)
−0.3V to +6V
−0.3V to (V_CC + 0.3V)
−0.3V to (V_CC + 0.3V)
Continuous
1068 mW
8.5 mW/°C above +25°C
−65°C to +150°C
+260°C
+150°C
≥ 3,500V
≥ 250V
(1) “Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be ensured. They are not meant to imply
that the devices should be operated at these limits. Electrical Characteristics specifies conditions of device operation.
(2) If Military/Aerospace specified devices are required, please contact the Texas Instruments Sales Office/Distributors for availability and
specifications.
(3) ESD Ratings:
HBM (1.5 kΩ, 100 pF) ≥ 3,500V
EIAJ (0Ω, 200 pF) ≥ 250V
Recommended OperatingConditions
Min
Typ
Max
Units
Supply Voltage (V_CC)
Operating Free Air Temperature (T_A)
+4.5
+5.0
+5.5
V
−40
+25
+85
°C
Electrical Characteristics
Over supply voltage and operating temperature ranges, unless otherwise specified.⁽¹⁾⁽²⁾
Symbol
Parameter
Conditions
Pin
V_OD1
ΔV_OD1
Differential Output Voltage
Change in Magnitude of V_OD1 for
Complementary Output States
R_L = 100Ω (Figure 1)
D_OUT−,
D_OUT+
V_OS
ΔV_OS
Offset Voltage
Change in Magnitude of V_OS for
Complementary Output States
V_OH
Output Voltage High
V_OL
Output Voltage Low
I_OS
Output Short Circuit Current
V_IH
Input Voltage High
V_IL
Input Voltage Low
I_I
Input Current
V_CL
Input Clamp Voltage
I_CC
No Load Supply Current
I_CCL
Loaded Supply Current
R_L = 100Ω
V_OUT = 0V ⁽³⁾
D_IN
V_IN = V_CC, GND, 2.5V or 0.4V
I_CL = −18 mA
D_IN = V_CC or GND
V_CC
D_IN = 2.5V or 0.4V
R_L = 100Ω All Channels
V_IN = V_CC or GND (all inputs)
Min
250
1.125
0.90
2.0
GND
−10
−1.5
Typ
340
4
1.25
5
1.41
1.07
−3.5
±1
−0.8
1.7
3.5
8
Max
450
35
1.375
25
1.60
−5.0
V_CC
0.8
+10
3.0
5.5
14.0
Units
mV
|mV|
V
|mV|
V
V
mA
V
V
μA
V
mA
mA
mA
(1) Current into device pins is defined as positive. Current out of device pins is defined as negative. All voltages are referenced to ground
except: V_OD1 and ΔV_OD1.
(2) All typicals are given for: V_CC = +5.0V, T_A = +25°C.
(3) Output short circuit current (I_OS) is specified as magnitude only, minus sign indicates direction only.
2
Submit Documentation Feedback
Product Folder Links: DS90C401
Copyright © 1998–2013, Texas Instruments Incorporated