BQ24100_07 Datasheet, PDF (2/36 Pages) Texas Instruments – SYNCHRONOUS SWITCHMODE, LI-ION AND LI-POLYMER CHARGE-MANAGEMENT IC WITH INTEGRATED POWER FETs (bqSWITCHER™)

bq24100, bq24103, bq24103A
bq24105, bq24108, bq24109
bq24113, bq24113A, bq24115
SLUS606K – JUNE 2004 – REVISED NOVEMBER 2007
www.ti.com
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
T_J
–40°C to 125°C
ORDERING INFORMATION⁽¹⁾
CHARGE REGULATION VOLTAGE (V)
INTENDED APPLICATION
4.2 V
Stand-alone
1 or 2 cells selectable (CELLS pin, 4.2 V or 8.4 V)
Stand-alone
1 or 2 cells selectable (CELLS pin, 4.2 V or 8.4 V)
Stand-alone
Externally programmable (2.1 V to 15.5 V)
Stand-alone
4.2 (Blinking status pins)
Stand-alone
1 or 2 cells selectable (CELLS pin, 4.2 V or 8.4 V)
System-controlled
1 or 2 cells selectable (CELLS pin, 4.2 V or 8.4 V)
System-controlled
Externally programmable (2.1 V to 15.5 V)
System-controlled
PART NUMBER⁽²⁾⁽³⁾
bq24100RHLR
bq24100RHLT
bq24103RHLR
bq24103RHLT
bq24103ARHLR
bq24103ARHLT
bq24105RHLR
bq24105RHLT
bq24108RHLR
bq24109RHLR
bq24113RHLR
bq24113RHLT
bq24113ARHLR
bq24113ARHLT
bq24115RHLR
bq24115RHLT
MARKINGS
CIA
CIA
CID
CID
CKO
CKO
CIF
CIF
CIU
CDY
CIJ
CIJ
CKF
CKF
CIL
CIL
(1) For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI
Web site at www.ti.com.
(2) The RHL package is available in the following options:
T – taped and reeled in quantities of 250 devices per reel
R – taped and reeled in quantities of 3000 devices per reel
(3) This product is RoHS compatible, including a lead concentration that does not exceed 0.1% of total product weight, and is suitable for
use in specified lead-free soldering processes.
ABSOLUTE MAXIMUM RATINGS⁽¹⁾
over operating free-air temperature range (unless otherwise noted)
Supply voltage range (with respect to V_SS)
IN, VCC
STAT1, STAT2, PG, CE, CELLS, SNS, BAT
OUT
Input voltage range (with respect to V_SS and PGND) CMODE, TS, TTC
VTSB
ISET1, ISET2
Voltage difference between SNS and BAT inputs (V_SNS – V_BAT)
Output sink
STAT1, STAT2, PG
Output current (average)
OUT
T_A Operating free-air temperature range
T_J Junction temperature range
T_stg Storage temperature
Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds
UNIT
20 V
–0.3 V to 20 V
–0.7 V to 20 V
7V
3.6 V
3.3 V
±1 V
10 mA
2.2 A
–40°C to 85°C
–40°C to 125°C
–65°C to 150°C
300°C
(1) Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under recommended operating
conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
2
Submit Documentation Feedback
Copyright © 2004–2007, Texas Instruments Incorporated
Product Folder Link(s): bq24100, bq24103, bq24103A bq24105, bq24108, bq24109 bq24113, bq24113A, bq24115