|
5962-86716012A Datasheet, PDF (2/5 Pages) Texas Instruments – Octal Buffer/Line Driver with TRI-STATE Outputs | |||
|
◁ |
Absolute Maximum Ratings (Note 1)
If Military/Aerospace specified devices are required,
please contact the National Semiconductor Sales Office/
Distributors for availability and specifications.
Storage Temperature
Ambient Temperature under Bias
Junction Temperature under Bias
Ceramic
VCC Pin Potential to Ground Pin
Input Voltage (Note 2)
Input Current (Note 2)
Voltage Applied to Any Output
in the Disabled or
Power-Off State
in the HIGH State
â65ËC to +150ËC
â55ËC to +125ËC
â55ËC to +175ËC
â0.5V to +7.0V
â0.5V to +7.0V
â30 mA to +5.0 mA
â0.5V to 5.5V
â0.5V to VCC
Current Applied to Output
in LOW State (Max)
DC Latchup Source Current
twice the rated IOL (mA)
â500 mA
Recommended Operating
Conditions
Free Air Ambient Temperature
Military
Supply Voltage
Military
Minimum Input Edge Rate
Data Input
Enable Input
â55ËC to +125ËC
+4.5V to +5.5V
(âV/ât)
50 mV/ns
20 mV/ns
DC Electrical Characteristics for âFCT Family Devices
Symbol
Parameter
FCT244
Units
VCC
Min
Max
Conditions
VIH
Input HIGH Voltage
VIL
Input LOW Voltage
VCD
Input Clamp Diode Voltage
VOH
Output HIGH
Voltage
2.0
V
0.8
V
â1.2
V
54FCT 4.3
V
Recognized HIGH Signal
Recognized LOW Signal
Min
IIN = â18 mA
Min
IOH = â300 µA
VOL
Output LOW
Voltage
54FCT 2.4
54FCT
0.2
V
IOH = â12 mA
Min
IOL = 300 µA
54FCT
IIH
Input HIGH Current
IIL
Input LOW Current
IOZ
Maximum TRI-STATE Current HIGH or
LOW
0.55
5
µA
â5
µA
±10 µA
Max
Max
Max
IOL = 48 mA
VIN = VCC
VIN = 0.0V
VIN = 0.0V or VIN = VCC
IOS
ICCQ
Output Short-Circuit Current
Quiescent Power Supply Current
-60
mA
Max
VOUT = 0.0V
1.5
mA
Max
VIN < 0.2V or VIN 5.3V, VCC =
5.5V
âICC
Quiescent Power
Supply Current
2.0
mA
Max
VI = 3.4V, VCC = 5.5V
ICCD
Dynamic ICC
ICCT
Total Power Supply
Current
0.4
mA/
Max
Outputs Open, VCC = 5.5V, VIN
MHz
5.3V or VIN < 0.2V, One Bit
Toggling, 50% Duty Cycle, OE =
GND, LE = VCC
6.0
mA
Max Outputs Open, fCP = 10 MHz,
VCC = 5.5V, VIN 5.3V or VIN <
0.2V, One Bit Toggling, 50%
Duty Cycle, OE = GND, LE =
VCC
Note 1: Absolute maximum ratings are values beyond which the device may be damaged or have its useful life impaired. Functional operation under these conditions
is not implied.
Note 2: Either voltage limit or current limit is sufficient to protect inputs.
Note 3: All outputs loaded; thresholds on input associated with output under test.
Note 4: Maximum test duration 2.0 ms, one output loaded at a time.
www.national.com
2
|
▷ |