DCP02_08 Datasheet, PDF (19/20 Pages) Texas Instruments – Miniature, 2W, Isolated UNREGULATED DC/DC CONVERTERS

DVB(R-PDSO-G12/28)
MECHANICAL DATA
MPDS106A – AUGUST 2001 – REVISED NOVEMBER 2001
PLASTIC SMALL-OUTLINE
–A–
28
Index
Area
1
Base
Plane
Seating
Plane
1,27
C
18,10
17,70
11,20
10,82
15
7,60
7,40
D –B–
10,65
10,01
0,25 M B M
14
0,30
0,10
2,65
2,35
1,27
0,40
F
0°–8°
0,75
0,25 ^{x 45°}
–C–
0,51
G _0,33
0,25 M C A M B S
0,32
0,23
0,10
NOTES: A. All linear dimensions are in millimeters.
B. This drawing is subject to change without notice.
C. Body length dimension does not include mold
flash, protrusions, or gate burrs. Mold flash, protrusions,
and gate burrs shall not exceed 0,15 mm per side.
D. Body width dimension does not include inter-lead flash
or portrusions. Inter-lead flash and protrusions
shall not exceed 0,25 mm per side.
E. The chamfer on the body is optional. If it is not present,
a visual index feature must be located within the
cross-hatched area.
F. Lead dimension is the length of terminal for soldering
to a substrate.
4202104/B 11/01
G. Lead width, as measured 0,36 mm or greater
above the seating plane, shall not exceed a
maximum value of 0,61 mm.
H. Lead-to-lead coplanarity shall be less than
0,10 mm from seating plane.
I. Falls within JEDEC MS-013-AE with the exception
of the number of leads.
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265
• POST OFFICE BOX 1443 HOUSTON, TEXAS 77251–1443
1