MSP430F23X0_08 Datasheet, PDF (18/64 Pages) Texas Instruments – MIXED SIGNAL MICROCONTROLLER

MSP430F23x0
MIXED SIGNAL MICROCONTROLLER
SLAS518A -- AUGUST 2006 -- REVISED MAY 2007
electrical characteristics over recommended ranges of supply voltage and operating free-air
temperature (unless otherwise noted)
active mode supply current (into V_CC) excluding external current (see Notes 1 and 2)
PARAMETER
TEST CONDITIONS
T_A
VCC
MIN
I_{AM, 1MHz}
Active mode (AM)
current (1MHz)
f_DCO = f_MCLK = f_SMCLK = 1MHz,
f_ACLK = 32,768Hz,
Program executes from flash,
BCSCTL1 = CALBC1_1MHZ,
DCOCTL = CALDCO_1MHZ,
CPUOFF = 0, SCG0 = 0, SCG1 = 0,
OSCOFF = 0
2.2 V
3V
I_{AM, 1MHz}
Active mode (AM)
current (1MHz)
f_DCO = f_MCLK = f_SMCLK = 1MHz,
f_ACLK = 32,768Hz,
Program executes in RAM,
BCSCTL1 = CALBC1_1MHZ,
DCOCTL = CALDCO_1MHZ,
CPUOFF = 0, SCG0 = 0, SCG1 = 0,
OSCOFF = 0
2.2 V
3V
I_{AM, 4kHz}
I_AM,100kHz
Active mode (AM)
current (4kHz)
Active mode (AM)
current (100kHz)
f_MCLK = f_SMCLK =
f_ACLK = 32,768Hz/8 = 4,096Hz,
f_DCO = 0Hz,
Program executes in flash,
SELMx = 11, SELS = 1,
DIVMx = DIVSx = DIVAx = 11,
CPUOFF = 0, SCG0 = 1, SCG1 = 0,
OSCOFF = 0
f_MCLK = f_SMCLK = f_{DCO(0, 0)} ≈ 100kHz,
f_ACLK = 0Hz,
Program executes in flash,
RSELx = 0, DCOx = 0,
CPUOFF = 0, SCG0 = 0, SCG1 = 0,
OSCOFF = 1
--40..85_C 2.2 V
105_C
2.2 V
--40..85_C 3 V
105_C
--40..85_C
105_C
--40..85_C
105_C
3V
2.2 V
2.2 V
3V
3V
TYP MAX UNIT
270 370
μA
390 550
226
μA
318
2
6
14
μA
3
9
17
60
85
95
μA
72
95
105
NOTES: 1. All inputs are tied to 0 V or V_CC. Outputs do not source or sink any current.
2. The currents are characterized with a Micro Crystal CC4V--T1A SMD crystal with a load capacitance of 9 pF.
The internal and external load capacitance is chosen to closely match the required 9pF.
18
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265