LP38691DTX-5.0 Datasheet, PDF (18/27 Pages) Texas Instruments – LP38693 500mA Low Dropout CMOS Linear Regulators Stable with Ceramic Output Capacitors

PACKAGE OPTION ADDENDUM
www.ti.com
1-Nov-2013
Orderable Device
LP38693SD-3.3/NOPB
LP38693SD-5.0
LP38693SD-5.0/NOPB
LP38693SDX-1.8/NOPB
LP38693SDX-2.5/NOPB
LP38693SDX-3.3/NOPB
LP38693SDX-5.0/NOPB
Status Package Type Package Pins Package Eco Plan
(1)
Drawing
Qty
(2)
ACTIVE
WSON
NGG 6 1000 Green (RoHS
& no Sb/Br)
NRND
WSON
NGG 6 1000
TBD
ACTIVE
WSON
NGG 6 1000 Green (RoHS
& no Sb/Br)
ACTIVE
WSON
NGG 6 4500 Green (RoHS
& no Sb/Br)
ACTIVE
WSON
NGG 6 4500 Green (RoHS
& no Sb/Br)
ACTIVE
WSON
NGG 6 4500 Green (RoHS
& no Sb/Br)
ACTIVE
WSON
NGG 6 4500 Green (RoHS
& no Sb/Br)
Lead/Ball Finish
(6)
CU SN
Call TI
CU SN
CU SN
CU SN
CU SN
CU SN
MSL Peak Temp Op Temp (°C)
(3)
Level-1-260C-UNLIM -40 to 125
Call TI
Level-1-260C-UNLIM
-40 to 125
-40 to 125
Level-1-260C-UNLIM -40 to 125
Level-1-260C-UNLIM -40 to 125
Level-1-260C-UNLIM -40 to 125
Level-1-260C-UNLIM -40 to 125
(1) _{The marketing status values are defined as follows:}
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
Device Marking
(4/5)
L130B
L131B
L131B
L128B
L129B
L130B
L131B
(2) _{Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability}
information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that
lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between
the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight
in homogeneous material)
(3) _{MSL, Peak Temp. - The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.}
(4) _{There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device.}
(5) _{Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation}
of the previous line and the two combined represent the entire Device Marking for that device.
Samples
Addendum-Page 4