LM3S9B92 Datasheet, PDF (178/1279 Pages) Texas Instruments – Stellaris LM3S9B92 Microcontroller

System Control
Bit/Field
9:8
7
6
5:4
3
2:0
Name
MAXADC0SPD
reserved
reserved
reserved
WDT0
reserved
Type
R/W
RO
RO
RO
R/W
RO
Reset
0
Description
ADC0 Sample Speed
This field sets the rate at which ADC module 0 samples data. You cannot
set the rate higher than the maximum rate. You can set the sample rate
by setting the MAXADC0SPD bit as follows (all other encodings are
reserved):
Value Description
0x3 1M samples/second
0x2 500K samples/second
0x1 250K samples/second
0x0 125K samples/second
0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
1
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
0
WDT0 Clock Gating Control
This bit controls the clock gating for the Watchdog Timer module 0. If
set, the module receives a clock and functions. Otherwise, the module
is unclocked and disabled. If the module is unclocked, a read or write
to the module generates a bus fault.
0
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
178
June 14, 2010
Texas Instruments-Advance Information