TS5L100_10 Datasheet, PDF (14/28 Pages) Texas Instruments – QUAD SPDT WIDE-BANDWIDTH LAN SWITCH WITH LOW ON-STATE RESISTANCE

TS5L100
QUAD SPDT WIDEĆBANDWIDTH LAN SWITCH
WITH LOW ONĆSTATE RESISTANCE
SCDS163A − MAY 2004 − REVISED MAY 2004
PARAMETER MEASUREMENT INFORMATION
VBIAS
EXT TRIGGER
BIAS
Network Analyzer
(HP8753ES)
P1
P2
VCC
YA
IA0
RL = 100 Ω
S
DUT
VS
E
VE
IA1
RL = 100 Ω
50 Ω^†
† _{A 50-Ω termination resistor is needed for the network analyzer.}
Figure 10. Test Circuit for Off Isolation (O_IRR)
Off isolation is measured at the output of the OFF channel. For example, when V_S = V_CC, V_E = 0, and YA is the input,
the output is measured at IA₀. All unused analog input (Y) ports are left open, and output (A) ports are connected to
GND through 50-Ω pulldown resistors.
HP8753ES setup
Average = 4
RBW = 3 kHz
V_BIAS = 0.35 V
ST = 2 s
P1 = 0 dBM
14
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265