TIBPAL16L8-25C Datasheet, PDF (14/19 Pages) Texas Instruments – LOW-POWER HIGH-PERFORMANCE IMPACT E PAL CIRCUITS

TIBPAL16L8-25C, TIBPAL16R4-25C, TIBPAL16R6-25C, TIBPAL16R8-25C
TIBPAL16L8-30M, TIBPAL16R4-30M, TIBPAL16R6-30M, TIBPAL16R8-30M
LOW-POWER HIGH-PERFORMANCE IMPACT ™ PAL^® CIRCUITS
SRPS059 – FEBRUARY 1984 – REVISED APRIL 2000
power-up reset (see Figure 2)
Following power up, all registers are set high. This feature provides extra flexibility to the system designer and
is especially valuable in simplifying state-machine initialization. To ensure a valid power-up reset, it is important
that the rise of V_CC be monotonic. Following power-up reset, a low-to-high clock transition must not occur until
all applicable input and feedback setup times are met.
VCC
4V
5V
tpd^†
(600 ns TYP, 1000 ns MAX)
Active-Low
Registered Output
1.5 V
tsu^‡
VOH
VOL
CLK
1.5 V
tw
VIH
1.5 V
VIL
† _{This is the power-up reset time and applies to registered outputs only. The values shown are from characterization data.}
‡ _{This is the setup time for input or feedback.}
Figure 2. Power-Up Reset Waveforms
14
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265