SLAU213A Datasheet, PDF (12/19 Pages) Texas Instruments – MSP430FG4618/F2013 Experimenter’s Board

8) Can I use two FETs to perform simultaneous access of the FG4618 and
F2013 during program/debug?
Yes, independent flash emulation tools (either USB or Parallel for ‘FG4618
and USB only for ‘F2013) can be simultaneously used to program the MSP430
target devices. When supplying power via the FET, it is recommended to use
only one FET to source power. The second FET can sense this voltage level
instead of supplying power, to avoid any voltage conflicts in-system. Refer to
section 5 Hardware Installation for details regarding supported power supply
configurations.
9) I cannot properly open the workspace and projects provided in the .zip
file with IAR, how can I open the sample code?
The IAR workspace/projects included for the sample code provided has been
created using IAR Embedded Workbench Version 3.42A. These projects are
not backward compatible with older IAR releases and will not open using prior
versions. New workspace/projects can be created and the sample code
source files can be added manually in order to build these samples with older
versions. Instruction for setting up a project in IAR are described in the MSP-
FET430 Flash Emulation Tool (FET) (for use with IAR v3.x) User's Guide,[5].
10) I have loaded the ‘FG4618 and ‘F2013 sample code for the capacitive
touch sensing application. It doesn’t seem to be working, what is wrong?
Verify that the correct jumper settings are used for H1 enabling the I2C
communication link between MSP430s. Make sure jumper JP2 is removed,
disconnecting LED3 from the touchpad circuitry. When connected, the LED
causes the measurement of the capacitive touch element on P1.0 to fail.
8. References
1. MSP430x4xx Family User's Guide, Texas Instruments literature number SLAU056
2. MSP430x2xx Family User's Guide, Texas Instruments literature number SLAU144
3. MSP430xG461x device data sheet, Texas Instruments literature number SLAS508
4. MSP430x20x3 Device datasheet, Texas Instruments literature number SLAS491
5. MSP-FET430 Flash Emulation Tool (FET) (for use with IAR v3.x) User's Guide, Texas Instruments
literature number SLAU138
6. MSP430 Interface to CC1100/2500 Code Library, Texas Instruments literature number SLAA325
9