PT6653E Datasheet, PDF (11/16 Pages) Texas Instruments – Single Device: 5-A Output Input Voltage Range: 9 V to 28 V 12 V / 24 V Input Compatible

MECHANICAL DATA
EEK (R–PSIP–G14)
0.325
(8,25)
2.36 (62,48) MAX.
2.000 (50,80)
1.71 (43,43) MAX.
0.38
(9,65)
0.59
(14,98)
MPSI014A – MARCH 2001 – REVISED FEBRUARY 2002
PLASTIC SINGLE-IN-LINE MODULE
Suffix B
ø0.187 (4,74)
2 Places
0.41(10,41)
0.52
(13,20)
1
0.205 (5,20)
0.350 (8,89)
1.22 (30,98)
0.83 _MAX.
(21,08)
Note F
0.100 (2,54) TYP.
0.017 (0,43) TYP.
0.19 (4,82)
0.080
(2,02)
0.61 (15,49)
MIN
0.42
(10,66)
MAX.
Seating Plane
0.006 (0,15) MAX.
0.175
(4,44)
2.42 (61,46)
2.000 (50,80)
1.77 (44,95)
1.42 (30,06)
0.325 (8,25)
Note E, F
Hole for #6–32 screws
0.10
(2,54)
Note H
0.86
(21,84) _1.35
(34,29)
0°–7°
Gage Plane
0.040 (1,01)
0.017(0,43) TYP.
0.17
(4,32)
0.150
(3,81)
Note G
0.040 (1,01) 14 Places
0.100 (2,54) 13 Places
0.235 (5,97)
0.350 (8,89)
0.64 (16,25)
PC LAYOUT
4202006/B 02/02
NOTES: A. All linear dimensions are in inches (mm).
B. This drawing is subject to change without notice.
C. 2–place decimals are " 0.030 (" 0, 76 mm).
D. 3–place decimals are " 0.010 (" 0, 25 mm).
E. Recommended mechanical keep-out area.
F. The metal tab is isolated but electrically conductive.
No signal traces are allowed under the metal tab area.
A solid copper island is recommended, which may be
grounded.
G. Power pin connections should utilize two or more
vias per input, ground and output pin.
H. No copper, power or signal traces in this area.
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265
1