V62-05611-01YE Datasheet, PDF (1/22 Pages) Texas Instruments – FAMILY OF 550-A/CH 3- MHZ RAIL-TO-RAIL INPUT/OUTPUT OPERATIONAL AMPLIFIERS

TLV2371ĆEP, TLV2372ĆEP, TLV2374ĆEP
FAMILY OF 550ƵA/Ch 3ĆMHz RAILĆTOĆRAIL INPUT/OUTPUT
OPERATIONAL AMPLIFIERS
SGLS306A − APRIL 2005 − REVISED APRIL 2006
D Controlled Baseline
− One Assembly/Test Site, One Fabrication
Site
D Extended Temperature Performance of
−55°C to 125°C
D Enhanced Diminishing Manufacturing
Sources (DMS) Support
D Enhanced Product-Change Notification
D Qualification Pedigree^†
D Rail-To-Rail Input/Output
D Wide Bandwidth . . . 3 MHz
D High Slew Rate . . . 2.4 V/µs
† _{Component qualification in accordance with JEDEC and industry}
standards to ensure reliable operation over an extended
temperature range. This includes, but is not limited to, Highly
Accelerated Stress Test (HAST) or biased 85/85, temperature
cycle, autoclave or unbiased HAST, electromigration, bond
intermetallic life, and mold compound life. Such qualification
testing should not be viewed as justifying use of this component
beyond specified performance and environmental limits.
description
D Supply Voltage Range . . . 2.7 V to 16 V
D Supply Current . . . 550 µA/Channel
D Input Noise Voltage . . . 39 nV/√Hz
D Input Bias Current . . . 1 pA
D Specified Temperature Range
−55°C to 125°C
D Ultrasmall Packaging
− 5-Pin SOT-23 (TLV2371)
− 8-Pin MSOP (TLV2372)
Operational Amplifier
−
+
The TLV237x single supply operational amplifiers provide rail-to-rail input and output capability. The TLV237x
takes the minimum operating supply voltage down to 2.7 V over the extended automotive temperature range
while adding the rail-to-rail output swing feature. The TLV237x also provides 3-MHz bandwidth from only
550 µA. The maximum recommended supply voltage is 16 V, which allows the devices to be operated from
(±8 V supplies down to ±1.35 V) a variety of rechargeable cells.
The CMOS inputs enable use in high-impedance sensor interfaces, with the lower voltage operation making
an ideal alternative for the TLC227x in battery-powered applications. The rail-to-rail input stage further
increases its versatility. The TLV237x is the seventh member of a rapidly growing number of RRIO products
available from Texas Instruments and it is the first to allow operation up to 16-V rails with good ac performance.
The 2.7-V operation makes the TLV237x compatible with Li-Ion powered systems and the operating supply
voltage range of many micro-power microcontrollers available today including Texas Instruments’ MSP430.
SELECTION OF SIGNAL AMPLIFIER PRODUCTS†
DEVICE
VDD (V)
VIO
(µV)
Iq/Ch
(µA)
IIB (pA)
GBW
(MHz)
SR
(V/µs)
SHUTDOWN
TLV237x
2.7−16
500
550
1
3
2.4
Yes
TLC227x
4−16
300
1100
1
2.2
3.6
—
TLV27x
2.7−16
500
550
1
3
2.4
—
TLC27x
3−16
1100
675
1
1.7
3.6
—
TLV246x
2.7−6
150
550
1300
6.4
1.6
Yes
TLV247x
2.7−6
250
600
2
2.8
1.5
Yes
TLV244x
2.7−10
300
725
1
1.8
1.4
—
† _{Typical values measured at 5 V, 25°C}
RAIL-
TO-
RAIL
I/O
O
O
—
I/O
I/O
O
SINGLES/DUALS/QUADS
S/D/Q
D/Q
S/D/Q
S/D/Q
S/D/Q
S/D/Q
D/Q
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
Copyright  2006, Texas Instruments Incorporated
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265
• POST OFFICE BOX 1443 HOUSTON, TEXAS 77251−1443
1