TXB0106_11 Datasheet, PDF (1/20 Pages) Texas Instruments – 6-BIT BIDIRECTIONAL VOLTAGE-LEVEL TRANSLATOR WITH AUTO-DIRECTION SENSING AND 15-kV ESD PROTECTION

TXB0106
www.ti.com ......................................................................................................................................................................................... SCES709 – SEPTEMBER 2008
6-BIT BIDIRECTIONAL VOLTAGE-LEVEL TRANSLATOR
WITH AUTO-DIRECTION SENSING AND ±15-kV ESD PROTECTION
FEATURES
1
• 1.2 V to 3.6 V on A Port and 1.65 to 5.5 V on
B Port (V_CCA≤ V_CCB)
• V_CC Isolation Feature – If Either V_CC Input Is at
GND, All Outputs Are in the High-Impedance
State
• OE Input Circuit Referenced to V_CCA
• Low Power Consumption, 4-µA Max I_CC
• I_off Supports Partial-Power-Down Mode
Operation
• Latch-Up Performance Exceeds 100 mA Per
JESD 78, Class II
• ESD Protection Exceeds JESD 22
– A Port
– 2500-V Human-Body Model (A114-B)
– 150-V Machine Model (A115-A)
– 1500-V Charged-Device Model (C101)
– B Port
– ±15-kV Human-Body Model (A114-B)
– 150-V Machine Model (A115-A)
– 1500-V Charged-Device Model (C101)
A1
V_CCA
A2
A3
A4
A5
A6
OE
PW PACKAGE
(TOP VIEW)
1
16
2
15
3
14
4
13
5
12
6
11
7
10
8
9
B1
V_CCB
B2
B3
B4
B5
B6
GND
RGY PACKAGE
(TOP VIEW)
V_CCA 2
A2 3
A3 4
A4 5
A5 6
A6 7
1
16
Exposed
Center Pad
8
9
15 V_CCB
14 B2
13 B3
12 B4
11 B5
10 B6
The exposed center pad, if used, must be
connected as a secondary ground or left
electrically open.
DESCRIPTION/ORDERING INFORMATION
This 6-bit noninverting translator uses two separate configurable power-supply rails. The A port is designed to
track V_CCA. V_CCA accepts any supply voltage from 1.2 V to 3.6 V. The B port is designed to track V_CCB. V_CCB
accepts any supply voltage from 1.65 V to 5.5 V. This allows for universal low-voltage bidirectional translation
between any of the 1.2-V, 1.5-V, 1.8-V, 2.5-V, 3.3-V, and 5-V voltage nodes. V_CCA should not exceed V_CCB.
When the output-enable (OE) input is low, all outputs are placed in the high-impedance state.
The TXB0106 is designed so that the OE input circuit is supplied by V_CCA.
This device is fully specified for partial-power-down applications using I_off. The I_off circuitry disables the outputs,
preventing damaging current backflow through the device when it is powered down.
To ensure the high-impedance state during power up or power down, OE should be tied to GND through a
pulldown resistor; the minimum value of the resistor is determined by the current-sourcing capability of the driver.
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2008, Texas Instruments Incorporated