TWL6030 Datasheet, PDF (1/9 Pages) Texas Instruments – Fully Integrated Power Management with Switch Mode Charger

TWL6030
www.ti.com
SWCS051B – AUGUST 2010 – REVISED DECEMBER 2012
Fully Integrated Power Management with Switch Mode Charger
FEATURES
1
• Seven highly efficient 6-MHz buck converters
– Two 0.6 to 2.1 V @ 1.5 A (up to 2.0 A with
some limitations)
– Five 0.6 to 2.1 V @ 0.8 A (up to 1.0 A with
some limitations)
• 11 General-purpose LDOs
– Six 1.0 to 3.3 V @ 0.2 A with battery or
preregulated supply (One can be used as a
vibrator driver.)
– One 1.0 to 3.3 V @ 50 mA with battery or
preregulated supply
– One low noise 1.0 to 3.3 V @ 50 mA with
battery or preregulated supply
– 3.3 V @ 35 mA USB LDO
– One LDO for TWL6030 internal use
– One LDO for internal and external use
• USB OTG module
• Backup battery charger
• 10-bit ADC with 17 input channels
• 13-bit Coulomb counter with four
programmable integration periods
• Low power consumption
– 5 µA in backup mode
– 20 µA in wait-on mode
– 110 µA in deep sleep, with two DCDCs
active
• RTC with alarm wake-up mechanism
• SIM and MMC card detections
• Two digital PWM outputs
• Thermal monitoring
– High-temperature warning
– Thermal shutdown
• Control
– Configurable power-up and power-down
sequences (OTP memory)
– Three output signals that can be included
in the start-up sequence
– Two I²C™ interfaces
– All resources configurable by I²C
• Clock management
32-kHz output
• Battery charger 1.5 A
– Charger for single-cell Li-Ion and
Li-Polymer battery packs
– Switched mode charger with integrated
power FET for up to 1.5-A current
– High-accuracy voltage and current
regulation
– Safety timer and reset control
– Thermal regulation protection
– Input/output overvoltage protection
– Charging indicator LED driver
– Boost mode operation for USB OTG
– Compliant with:
– USB 2.0
– OTG and EH 2.0
– YD/T 1591-2006
– USB battery charging 1.2
– Japanese battery charging requirements
(JEITA)
• Package 7 mm x 7 mm 187-pin nFBGA
APPLICATIONS
• Mobile phones and smart phones
• Gaming handsets
• Portable media players
• Portable navigation systems
• Handheld devices
• Tablets
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2010–2012, Texas Instruments Incorporated