TUSB6015 Datasheet, PDF (1/28 Pages) Texas Instruments – USB 2.0 High Speed Peripheral Controller

TUSB6015
SLLS937
REVISION 1.4 SEPTEMBER 12, 2008
TUSB6015 USB 2.0 High Speed Peripheral Controller Data Sheet
FEATURES
ƒ USB 2.0 High-Speed (HS) Compliant Peripheral
Controller Core
ƒ USB-IF TID # 40630005
ƒ Integrated USB 2.0 PHY
ƒ NOR FLASH - Like External Host Interface
ƒ DP/DM lines are high impedance when the device is
not powered
ƒ Six physical endpoints
ƒ Each endpoint is configurable as IN or OUT
with dedicated 1K buffer
ƒ NOR Flash Interface Access modes:
ƒ Asynchronous 16-bit single access
ƒ Asynchronous 32-bit single access
ƒ Asynchronous 16x16 burst access w/ DMA
ƒ Synchronous 16x16 burst access with DMA
(Max GPMC clock is 65 MHz)
ƒ Interrupt on DP/DM line state change for CEA-936-A
detect
ƒ VBUS MAX Voltage rating will be 6V for USB
Charging
ƒ RoHS Complaint 80 Terminal BGA MICROSTAR
JUNIOR Package
DESCRIPTION
The TUSB6015 is a USB 2.0 HS Peripheral Controller
designed for seamless interface to an external Host
processor through the NOR FLASH-like interface.
The NOR FLASH-like interface is a 16-bit, multiplexed
address/data, interface with support for synchronous
burst and single asynchronous read/write access.
Configuration registers are accessible via the
asynchronous chip select only; the End Point FIFO’s
are accessible via both the synchronous and
asynchronous chip selects.
The device also has eight user configurable general
purpose I/0 interface pins. The GPIO can be configured
as an interrupt or wakeup source. Some GPIO have
secondary NOR-flash DMA Request functionality.
The device is fully compliant with the Universal Serial
Bus Specification Rev. 2.0.
The ESD protection level is 2KV HBM (JESD22-
A114D), 500V CDM (JESD22-C101C).
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments
semiconductor products and disclaimers thereto appear at the end of this data sheet.
PRODUCT PREVIEW information concerns products in the
formative or design phase of development. Characteristic data
and other specifications are design goals. Texas Instruments
reserves the right to change or discontinue these products
without notice.
WWW.TI.COM
Copyright © 2008, Texas Instruments Incorporated
1