TS5V330_10 Datasheet, PDF (1/24 Pages) Texas Instruments – QUAD SPDT WIDE-BANDWIDTH VIDEO SWITCH WITH LOW ON-STATE RESISTANCE

TS5V330
www.ti.com .............................................................................................................................................................. SCDS164D – MAY 2004 – REVISED JUNE 2009
QUAD SPDT WIDE-BANDWIDTH VIDEO SWITCH WITH LOW ON-STATE RESISTANCE
FEATURES
1
• Low Differential Gain and Phase
(D_G = 0.64%, D_P = 0.1 Degrees Typ)
• Wide Bandwidth (BW = 300 MHz Min)
• Low Crosstalk (X_TALK = –63 dB Typ)
• Low Power Consumption
(I_CC = 3 µA Max)
• Bidirectional Data Flow With Near-Zero
Propagation Delay
• Low ON-State Resistance (r_on = 3 Ω Typ)
• V_CC Operating Range From 4.5 V to 5.5 V
• I_off Supports Partial-Power-Down Mode
Operation
• Data and Control Inputs Provide Undershoot
Clamp Diode
• Control Inputs Can Be Driven by TTL or
5-V/3.3-V CMOS Outputs
• Latch-Up Performance Exceeds 100 mA Per
JESD 78, Class II
• ESD Performance Tested Per JESD 22
– 1000-V Charged-Device Model (C101)
• Suitable for Both RGB and Composite-Video
Switching
D, DBQ, OR PW PACKAGE
(TOP VIEW)
IN 1
S1_A 2
S2_A 3
D_A 4
S1_B 5
S2_B 6
D_B 7
GND 8
16 V_CC
15 EN
14 S1_D
13 S2_D
12 D_D
11 S1_C
10 S2_C
9 D_C
RGY PACKAGE
(TOP VIEW)
1
S1_A 2
S2_A 3
D_A 4
S1_B 5
S2_B 6
D_B 7
8
16
15 EN
14 S1_D
13 S2_D
12 D_D
11 S1_C
10 S2_C
9
DESCRIPTION/ORDERING INFORMATION
The TS5V330 video switch is a 4-bit 1-of-2 multiplexer/demultiplexer with a single switch-enable (EN) input.
When EN is low, the switch is enabled and the D port is connected to the S port. When EN is high, the switch is
disabled and the high-impedance state exists between the D and S ports. The select (IN) input controls the data
path of the multiplexer/demultiplexer.
Low differential gain and phase make this switch ideal for composite and RGB video applications. This device
has wide bandwidth and low crosstalk, making it suitable for high-frequency applications as well.
This device is fully specified for partial-power-down applications using I_off. The I_off feature ensures that damaging
current will not backflow through the device when it is powered down. This switch maintains isolation during
power off.
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2004–2009, Texas Instruments Incorporated