TS3USB3000 Datasheet, PDF (1/22 Pages) Texas Instruments – DPDT USB 2.0 High-Speed (480Mbps) and Mobile High-Definition Link (MHL) Switch

TS3USB3000
www.ti.com
SCDS337 – DECEMBER 2012
DPDT USB 2.0 High-Speed (480Mbps) and Mobile High-Definition Link (MHL) Switch
Check for Samples: TS3USB3000
FEATURES
1
• V_CC Range 2.7V to 4.3V
• Mobile Hi-definition Link (MHL) Switch
– Bandwidth (-3dB) 6.1 GHz
– Ron (Typ) 5.7 Ω
– Con (Typ) 1.6 pF
• USB Switch
– Bandwidth (-3dB) 6.1 GHz
– Ron (Typ) 4.6 Ω
– Con (Typ) 1.4 pF
• Current Consumption 30 µA Typ
• Special Features
– I_OFF Protection Prevents Current Leakage in
Powered Down State (V_CC and V_BUS = 0 V)
– 1.8-V Compatible Control Inputs (SEL, OE)
– Over-Voltage Tolerance (OVT) on all I/O
Pins up to 5.5V Without External
Components
• ESD Performance
– 3.5 kV Human Body Model (A114B, Class II)
– 1 kV Charged Device Model (C101)
• 10-pin QFN Package (2.0x1.5 mm, 0.5 mm
Pitch)
DESCRIPTION
The TS3USB3000 is a double-pole, double throw
(DPDT) multiplexer that includes a high speed Mobile
High-Definition Link (MHL) switch and an USB 2.0
High-Speed (480Mbps) switches in the same
package. These configurations allow the system
designer to use a common USB or Mico-USB
connector for both MHL video signals and USB data.
The TS3USB3000 has a VCC range of 2.7V to 4.3V
and supports over-voltage tolerance (OVT) feature,
which allows the I/O pins to withstand over-voltage
conditions (up to 5.5V). The power-off protection
feature forces all I/O pins to be in high impedance
mode when power is not present, allowing full
isolation of the signals lines under such condition
without excessive leakage current. The select pins of
TS3USB3000 are compatible with 1.8V control
voltage, allowing them to be directly interfaced with
the General Purpose I/O (GPIO) from a mobile
processor.
The TS3USB3000 comes with a small 10-pin QFN
package with only 2.0mm x 1.5mm is size, which
makes it a perfect candidate to be used in mobile
applications.
SWITCH DIAGRAM
TS3USB3000
USB+
D+
MHL+
D-
USB-
MHL-
SEL
Control
Logic
/OE
ORDERING INFORMATION
T_A
–40°C to 85°C
PACKAGE
QFN– RSE
Tape and reel
ORDERABLE PART NUMBER
TS3USB3000RSER
TOP-SIDE MARKING
DSJ
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2012, Texas Instruments Incorporated