TS3USB30 Datasheet, PDF (1/12 Pages) Texas Instruments – HIGH-SPEED USB 2.0 (480-Mbps) 1:2 MULTIPLEXER/DEMULTIPLEXER SWITCH WITH SINGLE ENABLE

www.ti.com
TS3USB30
HIGH-SPEED USB 2.0 (480-Mbps) 1:2 MULTIPLEXER/DEMULTIPLEXER SWITCH
WITH SINGLE ENABLE
SCDS237 – JUNE 2007
FEATURES
• V_CC Operation at 3.0 V and 4.3 V
• 1.8-V Compatible Control-Pin Inputs
• I_OFF Supports Partial Power Down Mode
Operation
• r_on = 10 Ω Max
• ∆r_on <0.35 Ω Typ
• C_io(on) = 7 pF Typ
• Low Power Consumption (1 µA Max)
• 6KV ESD protection
• -3dB Bandwidth = 955-MHz Typ
• Packaged in 10-pin TQFN (1.4mm x 1.8mm)
RSW PACKAGE
(TOP VIEW)
OE 8
V_CC
9
S 10
76
12
5 D–
4 GND
3 D+
APPLICATIONS
• Routes Signals for USB 1.0, 1.1, and 2.0
RSW PACKAGE
(BOTTOM VIEW)
S 10
V_CC
9
OE 8
12
76
3 D+
4 GND
5 D–
DESCRIPTION/ORDERING INFORMATION
The TS3USB30 is a high-bandwidth switch specially designed for the switching of high-speed USB 2.0 signals in
handset and consumer applications, such as cell phones, digital cameras, and notebooks with hubs or
controllers with limited USB I/Os. The wide bandwidth (750 MHz) of this switch allows signals to pass with
minimum edge and phase distortion. The device multiplexes differential outputs from a USB host device to one
of two corresponding outputs. The switch is bidirectional and offers little or no attenuation of the high-speed
signals at the outputs. It is designed for low bit-to-bit skew and high channel-to-channel noise isolation, and is
compatible with various standards, such as high-speed USB 2.0 (480 Mbps).
ORDERING INFORMATION
T_A
–40°C to 85°C
RSW
PACKAGE ^{(1) (2)}
Tape and reel
ORDERABLE PART NUMBER
TS3USB30RSWR
TOP-SIDE MARKING
L6O
(1) Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at
www.ti.com/sc/package.
(2) For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI
website at www.ti.com.
PIN DESCRIPTION
NAME
DESCRIPTION
OE
Bus-switch enable
S
Select input
D+, D–, Dn+, Dn–
Data ports
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2007, Texas Instruments Incorporated