TS3L110_10 Datasheet, PDF (1/26 Pages) Texas Instruments – QUAD SPDT HIGH-BANDWIDTH 10/100 BASE-T LAN SWITCH DIFFERENTIAL 8-CHANNEL TO 4-CHANNEL MULTIPLEXER/DEMULTIPLEXER

TS3L110
QUAD SPDT HIGH-BANDWIDTH 10/100 BASE-T LAN SWITCH
DIFFERENTIAL 8-CHANNEL TO 4-CHANNEL MULTIPLEXER/DEMULTIPLEXER
SCDS176 − SEPTEMBER 2004
D Wide Bandwidth (BW = 500 MHz Typ)
D Low Crosstalk (X_TALK = −30 dB Typ)
D Bidirectional Data Flow, With Near-Zero
Propagation Delay
D Low and Flat ON-State Resistance
(r_on = 4 W Typ, r_on(flat) = 1 W)
D Switching on Data I/O Ports (0 to 5 V)
D V_CC Operating Range From 3 V to 3.6 V
D I_off Supports Partial-Power-Down Mode
Operation
D Data and Control Inputs Have Undershoot
Clamp Diodes
D Latch-Up Performance Exceeds 100 mA Per
JESD 78, Class II
D ESD Performance Tested Per JESD 22
− 2000-V Human-Body Model
(A114-B, Class II)
− 1000-V Charged-Device Model (C101)
D Suitable for Both 10 Base-T/100 Base-T
Signaling
D, DBQ, DGV, OR PW PACKAGE
(TOP VIEW)
RGY PACKAGE
(TOP VIEW)
S1
IA₀ 2
IA₁ 3
YA 4
IB₀ 5
IB₁ 6
YB 7
GND 8
16 V_CC
15 E
14 ID₀
13 ID₁
12 YD
11 IC₀
10 IC₁
9 YC
1
IA₀ 2
IA₁ 3
YA 4
IB₀ 5
IB₁ 6
YB 7
8
16
15 E
14 ID₀
13 ID₁
12 YD
11 IC₀
10 IC₁
9
description/ordering information
The TI TS3L110 LAN switch is a 4-bit 1-of-2 multiplexer/demultiplexer with a single switch-enable (E) input.
When E is low, the switch is enabled, and the I port is connected to the Y port. When E is high, the switch is
disabled, and the high-impedance state exists between the I and Y ports. The select (S) input controls the data
path of the multiplexer/demultiplexer.
ORDERING INFORMATION
T_A
PACKAGE^†
ORDERABLE
PART NUMBER
TOP-SIDE
MARKING
QFN − RGY
Tape and reel TS3L110RGYR
TK110
SOIC − D
Tube
Tape and reel
TS3L110D
TS3L110DR
TS3L110
−40°C to 85°C
SSOP (QSOP) − DBQ
TSSOP − PW
Tape and reel
Tube
Tape and reel
TS3L110DBQR
TS3L110PW
TS3L110PWR
TK110
TK110
TVSOP − DGV
Tape and reel TS3L110DGVR
TK110
† _{Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines}
are available at www.ti.com/sc/package.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265
Copyright © 2004, Texas Instruments Incorporated
1